USER GUIDE LEADERBOARD INTERACTIVE WHITE BOARD MODEL LB77H USER GUIDE DUKANE AUDIO VISUAL PRODUCTS DIVISION Thank you for purchasing the Dukane interactive whiteboard. This Guide will assist you with installation and operation of the board. We welcome your feedback and are ready to assist you. Please forward you comments and suggestions to: Dukane AV Division 2900 Dukane Drive St Charles, IL 60174 Or call 1-800-676-2487 Email: avserdept@dukcorp.
Legends Instruction: additional instruction for software operations. Note: Special items that may require your attention during use of the board. Warning: This symbol indicates information that if ignored could possibly result in personal injury or major damage to the product. Caution Note z z To avoid electric shock, please do not install the interactive whiteboard in wet or very humid locations.
Important Note z Only erasable interactive whiteboards can be written on with dry erase colored pens. For some boards use only electronic pens. z To remove accidental permanent marker on the board, write over the marker with a dry erase pen and then wipe off with a cloth. The dry erase ink acts as a removal agent for the permanent ink. z Please make sure the whiteboard is correctly connected to the computer, and the power cable is connected.
Contents LEGENDS ............................................................................................................................................................................. 1 CAUTION NOTE .................................................................................................................................................................. 1 CONTENTS....................................................................................................................................
Introduction Introduction The Interactive whiteboard is a combination of electronic, software, and Internet technologies. It is a revolution replacing the old blackboard-and-chalk that has lasted for hundreds of years. Interactive whiteboard is a computer based input device, which, when connected with projector can provide functions such as writing, annotating, drawing, editing, printing and storage.
Unpacking the Interactive Whiteboard 1. The interactive whiteboard components: One interactive whiteboard package: The shipping carton.
2. Standard Accessories Standard Accessories include: Description Specification Quantity Purpose Electronic whiteboard pen Pen 3 The pen for interactive whiteboard, with Type AAA batteries (1.5V). USB-RS232 connecting cable 33 FT. (10 meters) 1 The dedicated cable connecting computer and interactive whiteboard CD 1 Drive and application software 1 Manual Software Disc Interactive Whiteboard User Guide picture 3.
Description of Appearance z WhiteBoard with USB port Supply Power: Writing Area; II Function keys; III Interface Board 1. Serial port; 2.
Installation 1. Install Interactive WhiteBoard z Wall mounted Select proper wall location, and install hanger parts on the wall. Then hang the interactive whiteboard. (Prior to installation, please install the tray). Refer to the Installation Diagram of Interactive whiteboard. z Bracket type installation( brackets are optional parts) Assembly the brackets according to Bracket installation Diagram found with the brackets. Then hang the interactive whiteboard. Refer to the Bracket Installation Diagram>. 2.
4、Install LEADERBOARD Software a) Insert 《LEADERBOARD Install Software》 CD disc; b) Click program logo c) Enter the LEADERBOARD setup wizard page: d) Click; 5) Select install remote: 9
6) Select install type: 7) Select “Launch the Program” and then “Finish” the installation. For a XP installation the program may display the login screen with boxes for the “User Name” and “Password”. If this appears, click on the “Login” box leaving the “User Name” and “Password” blank.
6、Install USB-RS232 connection cable Driver If USB-RS232 connection cable is used, the corresponding driver must be installed. If a serial port cable is exclusively employed, it is not necessary to install the driver for the USB cable. When USB-RS232 connection cable is used to connect the electronic whiteboard to the computer (as shown in the following figure), the driver for USB-RS232 connection cable should be installed.
4) Click This will Install the USB-RS232 connection cable driver. 5) Once connected correctly, in My Computer-Device Manager, you will see the device “CP210X USB to UART Bridge Controller,” as shown in the following figure: When USB-RS232 connection cable is used to connect the electronic whiteboard to the computer, the driver for USB-RS232 connection cable must be installed. Otherwise, the data communication between the interactive whiteboard and the computer can’t be realized.
Operating the board 1. Startup driver of interactive whiteboard 1) Click “Start"→"All programs"→”Dukane LeaderBoard Software"→"LeaderBoard Software"→ "USB DRIVER", and click the “USB Driver”. A icon of the communication module the status bar tray in the lower-right corner of the desktop. will appear in 2) Click the tray icon after successfully connecting interactive whiteboard, select "Option" from the popup menu to set the correct model for the whiteboard driver.
2) Left click "Re-orientation", it will produce a popup window for Orientation. Then click the central position of the flashing "cross " using the electronic pen. Follow the prompts (there are six orientation points, left up, right up, right down, left down, top up and middle) as shown below: Please select "Re-orientation" when installing the interactive whiteboard for the first time or when the position of the hardware (projector and interactive whiteboard) has been changed.
2) Key-in user name and password, then click "Login". (or leave both blank and click on click "Login".) A default administrator is “Administrator”, and the password is “123”, and it must match for upper/lower case. 3) The board will enter the software control mode. Ensure that the connection between interactive whiteboard and PC is good and the driver of interactive whiteboard is installed before starting the application software. If not, application program will not startup correctly.
Function Keys (Across bottom of board) Function keys Definition Control Mode MOUSE Window Mode Annotation Mode PEN PEN Orientation Orientation Orientation Orientation Control Mode No Effect Switch mode Annotation Mode Switch to annotation mode Switch to annotation mode No Effect Window Mode No Effect Top Page Top Page Create a blank page Create a blank page Create page Page Up No Effect Page Up Page Up Page Down No Effect Page Down Page Down Normal Pen Switch to annotation
Trouble Shooting If message appears " Failed to verify the IPBOARD, the program can't run further!", please check whether there is a good connection between whiteboard and PC.” 1. z Please check if cable is connected on both ends. z Check if the whiteboard has power. ( red indicator on) z Check if a serial port from COM1 to COM4 has been assigned to the board. One serial port from COM1 to COM4 for must be assigned to the whiteboard. z Check if the driver of whiteboard has been setup correctly.
The projector should have the following three properties: 1) Front projector 2) Support resolution of the PC 3) The luminous output should be more than 500 lumens. 9. Hookup when the serial port is occupied. Both table model and notebook PCs allow added serial ports: z Install a serial port card on PC (note: generally, PCMCIA serial port card for notebook PC) z Using"USB2.0 to RS232C plus the special cable. 10.
Specifications for the PC and Board Hardware Platform Common PC, notebook PC Operation System WinMe/2000/XP/2003 Transmission RS-232C/USB Interface Resolution 4096×4096 Data-signaling rate 19200Baud Rate Operating Principle Wireless electromagnetic induction Operating Modes Control Mode/ Window Mode / Annotation Mode. USB Power Supply DC 5V 100mA Service life of battery Different service life for different battery, common alkaline of electronic pen battery can last over three months.