DVP508 Document Camera User Manual [Important] To download the updated quick start guide, multilingual manuals, software, and drivers, please visit Dukanes website at www.dukane.
Contents Copyright Information ....................................................................................... 3 Chapter 1 Precautions ..................................................................................... 4 Safety Precautions ....................................................................................... 5 FCC Warning ............................................................................................... 5 EN55022 (CE Radiation) Warning ...............................
8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 8.11 8.12 8.13 8.14 8.15 8.16 8.17 8.18 8.19 8.20 8.21 8.22 I would like to automatically adjust the image to have best brightness and focusing performance (Auto tune)......................................................... 22 I would like to set the image source of VGA OUT2 .......................... 22 I would like to switch image sources ................................................ 22 I would like to make text clearer and photos more colorful ..............
Copyright Information Copyrights © Dukane Audio Visual Products. All rights reserved. Copying, reproducing or transmitting this file is not allowed if a license is not provided by Dukane Audio Visual Products unless copying this file is for the purpose of backup after purchasing this product. In order to keep improving the product, Dukane. hereby reserves the right to make changes to product specifications without prior notice. The information in this file is subject to change without prior notice.
Chapter 1 Precautions Always follow these safety instructions when setting up and using the Document Camera: 1. Do not place Document Camera in tilted position. 2. Do not place the Document Camera on an unstable trolley, stand or table. 3. Do not use the Document Camera near water or source of heat. 4. Use attachments only as recommended. 5. Use the type of power source indicated on the Document Camera.
Safety Precautions Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This Document Camera has a 3-wire AC line Plug. This is a safety feature to ensure that the plug will fit into the power outlet. Do not try to disable this safety feature. If the Document Camera will not be used for a long period of time unplug it from the power outlet. Note RISK OF ELECTRIC SHOCK DO NOT OPEN Note: To reduce the risk of electric shock. Do not remove cover (or back).
Chapter 2 Package Content DVP508 Quick Start Guide Download and Safety Instruction C-Video Cable Power Adapter VGA Cable USB Cable Audio cable Power Cord Remote Control Microscope Adapter Appearance may vary with country/region Remote Control Holder English - 6
Chapter 3 Product Overview 9 6 1 2 5 3 3 10 7 8 4 1. Lens 2. Camera arm 3. 4. Backlight 5. Auxiliary floodlight and lamp arm Remote Control Holder 6. DIP Switch Settings 7. SD card slot 8. Control Panel 9. Remote sensor 10. Input/output port 3.
Chapter 4 Installation and Connections 4.
4.2 Connecting to a Projector or Monitor VGA Cable Power Adapter Power Cord Monitor or Projector \ Power Outlet 螢幕 \ 4.3 Connecting to a Computer and Use Dukane Software or an Interactive Whiteboard (IWB) Projector Power Adapter USB Cable VGA Cable Power Cord Power Outlet USB Cable Computer Drivers and software can be downloaded from the Dukanes website.
4.4 Connecting to a Projector, 2 PCs, and a Monitor at the Same Time Power Adapter VGA Cable VGA Cable Power Cord Power Outlet VGA Cable VGA Cable (Default) Computer (1) Computer (2) Projector Monitor Press button to switch the image sources. For VGA 1 setting, refer to 8.3 I would like to switch image sources. For VGA 2 setting, refer to 8.2 I would like to set the image source of VGA OUT2. 4.
: It doesn’t support C-Video and VGA simultaneously. Once C-Video is on, VGA OUT is not supported. 4.6 Connecting to DVD and display DVD images button to switch the image source. Press For VGA 1 setting, refer to 8.3 I would like to switch image sources. For VGA 2 setting, refer to 8.2 I would like to set the image source of VGA OUT2. 4.6.1 C-Video VGA Cable Power Adapter Power Cord Power Outlet Audio Cable C-Video Cable Monitor or Projector \ DVD 螢幕 \ 4.6.
4.7 Connecting to an HDTV Power Adapter HDMI Cable Power Cord HDTV Power Outlet 4.
4.9 Connecting to Audio Input and Output Audio output is set according to VGA input; if VGA IN has Audio in, preset the output of audio source of VGA IN(1). Power Adapter Power Cord Audio Cable Audio Cable Audio Cable TV or DVD Power Outlet Computer (1) Computer (2) Speaker : Or connect to an additional amplifier before connecting to the speaker. 4.
Chapter 5 Start Using : Please adjust it to be suitable for the local voltage frequency of 50/60Hz. For the frequency in actual use, please refer to the manual. (Attachment 1) 1. Remove the lens cap. 2. Pull up the camera and the camera arm. The camera should aim at the center of the presenter. 3. Pull up the lamp arm to a proper position. 4. Place an object to be displayed under the camera. 5. Press [POWER] on the remote control or control panel to power on. 6.
Chapter 6 DIP Switch Settings : You must re-start for DIP switching configuration to take effective. 6.1 Connecting to a projector or monitor 6.1.1 XGA 60Hz output( default values) XGA 50Hz output 6.1.2 SXGA 60Hz output SXGA 50Hz output 6.1.3 720P 60Hz output 720P 50Hz output 6.1.
6.2 Connecting to a TV/DVD 6.2.1 NTSC: America, Taiwan, Panama, Philippines, Canada, Chile, Japan, Korea and Mexico 60Hz 50Hz 6.2.2 PAL: Countries or regions not listed above. 60Hz 50Hz It doesn’t support C-VIDEO and VGA simultaneously. Once C-VIDEO is on, VGA is not supported.
Chapter 7 Control Panel/Remote Control and Setting Menu 7.1 Functions of control panel and remote control : OSD is not available at C-VIDEO mode. [MENU] / [ENTER] / [PLAYBACK] / [ROTATE] / [PAN] / [RECORD] / [CAPTURE] / [DELETE] / [VGA] / [SLIDE SHOW] / [PBP] functions are not available on the machine panel and the remote control. The below functions are listed alphabetically. Name Function Descriptions Operation Turn on and off the Document Camera.
MENU Activate the setting menu function/exit menu. Remote control / Control panel PAN Switch a part of the live image. Remote control PBP Display live images together with captured images. Remote control PLAYBACK Display the list of captured images. Remote control / Control panel Projector ON Turn on the projector. Control panel Projector OFF Turn off the projector. Control panel RECORD Press [Record] to record images to SD card (priority), press [Record] again to stop recording.
7.2 Setting Menu Press [MENU] on the remote control or control panel to enter the setting menu; The bold underlined values in the following table are the defaults.
Delete All Yes/No Format Yes/No USB Transfer Camera/Storage device Capture Capture Time Capture Interval Setting 1. Single 2. Continuous 3. Disable 1. 2. 3. 4. 5. 1. 2. 3. 4. 5. 6. 1 hr 2 hr 4 hr 8 hr 24 hr 5 Sec 10 Sec 30 Sec 1 Min. 2 Min. 5 Min. Auto Exposure On/Off White Balance Enter Projector Type DLP/LCD Volume 0~A~Max Use the left and right arrow keys to select, and then press [ENTER] to confirm the deletion of photos.
VGA OUT(2) Language VGA IN / VGA Out(1) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. English 繁體中文 Deutsch Français Español Русский Nederlands Suomi Polski Italiano Português Svenska ČESKY 简体中文 Lock Down On/Off Auto Erase On/Off Preset Load Yes/No Preset Save Yes/No Factory Reset Yes/No Advanced 1. Use the left and right arrow keys to select the images displayed by VGA OUT(2). 2.
Chapter 8 Descriptions of major functions 8.1 I would like to automatically adjust the image to have best brightness and focusing performance (Auto tune) 1. Press [AUTO TUNE] on the remote control or control panel to adjust automatically. 8.2 I would like to set the image source of VGA OUT2 Press [MENU] on the remote control or control panel to enter the setting menu 1. Press [] or [] to the [Setting] menu. 2. Press [] to enter [VGA OUT2]. 3. Press [] or [] to select [VGA OUT 1/VGA IN]. 4.
8.4 I would like to make text clearer and photos more colorful The default of [PHOTO/TEXT] is PHOTO. Use the remote control or the control panel to change settings. [Photo] (default): for viewing photos or text with photos and will make the photos more colorful. [Text]: for viewing text files and will make the text clearer. [Gray]: for viewing black and white photos and will make the grayscale differentiation more distinct. 1. Press [MENU] to enter the setting menu. 2.
8.9 I would like to capture images 8.9.1 Setting the quality of captured images 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Storage] menu. 3. Press [] to find [Image Quality]. 4. Press [] or [] to select among [High/Medium/Low]. 5. Press [MENU] to exit. 8.9.2 Setting continuous capture 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Setting] menu. 3.
8.11 I would like to delete captured images 1. Use the remote control and press [PLAYBACK] 2. Press [] or [] or [] or [] to select the thumbnail you want you delete. 3. Pressing [DELETE] will open a [Delete File] window. 4. Press [] or [] to select [Yes] (The default value is No). 5. Press [ENTER] to delete the selected photo. 6. Press [MENU] to exit. 8.12 I would like to automatically delete the captured images whenever it is turned off (Auto Erase) 1.
8.13.3. Playing image 1. Press [PLAYBACK] on the remote control or control panel to display thumbnails of all videos recorded. 2. Press [] or [] or [] or [] to select files to browse. 3. Press [ENTER] for full-screen play. 4. Press [] or [] to adjust the volume of the video. When motion images are played back, the volume of Audio Out can be controlled by up/ low arrow keys. In any other modes, you are not allowed to control volume using [] or [] key. 5.
8.15.2 Setting delay time 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Storage] menu. 3. Press [] to find [Delay]. 4. Press [] or [] to select image switch mode between [0.5 Sec / 1 Sec / 3 Sec / 5 Sec / 10 Sec / Manual]. 5. Press [MENU] to exit. 8.15.3 Activating/Stopping the slide show Images over 8 MB, cannot be played. If you use the remote control or the control panel: 1. Press [SLIDE SHOW] to start playing. 2.
5. Press [PLAYBACK] to return to image thumbnails. 6. Repeat Steps 2 ~ 4. 7. Press [MENU] to exit. 8.18 I would like to resume the factory default setting (Factory Reset) 8.18.1 Use the OSD menu 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Advanced] menu. 3. Press [] to the [Factory Reset]. 4. Press [] or [] to select [Yes]. 5. Press [ENTER] to activate. 8.18.2 Use Compound Key 1.
8.20 I would like to control projector. 8.20.1 Connecting to a computer Connect DVP508 to a computer, and for connecting method, refer to User Manual 4.8 Connecting to a Computer with RS232. 8.20.2 Installing application software 8.20.2.1 8.20.2.2 8.20.2.3 www.dukane.com/av Go to Dukanes website: download the software [Projector Control] from the download page. Extract the file and then click [Setup.exe] to install. The installation wizard will guide you through the process.
8.20.2.4 When the installation is completed, press [Finish] to end the installation procedure. 8.20.3 Setting procedure 8.20.3.1 Click[Start]/[Programs]/[Projector Setup] 8.20.3.2 8.20.3.3 When the procedure is started, a setting window will pop up. Press [CONNECT] to set up the connection. [Com Port] lamp flashing green indicates a successful connection. DUKANE 7855N Press [Select Projector] to select the projector type and display information. 8.20.3.
8.20.4 Connecting to a projector 8.20.4.1 8.20.4.2 Remove the RS-232 cable from the computer. Connect the RS-232 cable to the RS-232 port on the projector. PS750 DVP508 RS232 Adapter 8.20.5 Control of projector 8.20.5.1 8.20.5.2 Press [Projector ON] on the control panel to turn on the projector. Press [Projector OFF] on the control panel to turn off the projector. 8.21 Using a SD card 8.21.
8.20.2.2 The screen will display as follow, once you insert an unformatted SD card: Format SD Card YES NO Press [] or [] on the control panel to select. The data previously saved on the SD card will be erased when it is formatting. 8.21.3 Ejecting a SD card Turn the power off before ejecting the SD card to avoid damaging the SD card. 8.22 Computer-related functions Ensure that the USB cable is connected and the drivers are installed before using the computer-related functions.
8.22.2 I would like to insert a photo in MS-Word For Windows Office 2003 or later versions, please use the function with OneNote. 1. Click [Insert / Image / From Scanner or Camera] in MS-Word. 2. Select [Visual Presenter V2] and click [Custom Insert]. 3. Click [Get Picture]. It will capture the photo of live image. 8.22.3 I would like to change the setting of the DVP508 and then capture a photo in MS-Word 1. Click [Insert / Image / From Scanner or Camera] in MS-Word.
2. Select [Visual Presenter V2 TWAIN] and click [Custom Insert]. 3. A window showing a live image (see below) will be displayed: 4. Press [Setting] To control the DVP508 via the Camera Settings interface. The operating procedure is the same with the remote control and control panel of the DVP508. Refer to User Manual Chapter 7 Control Panel / Remote Control and Setting Menu. 5. Press [Capture] to capture images in MS-Word. 6. Press [Cancel] to exit.
8.22.4 I would like to set the DVP508 as a webcam for Skype The DVP508 can be used as a webcam for teleconferencing software such as Skype or MSN. With Skype as an example, operating instructions are provided below: 1. Open Skype and enter [Tools] > [Options]. 2. Select [Video Settings] > [webcam] > [Visual Presenter V2] and check Start my video automatically when I am in a call, as shown below. 3. Start calling your contact. When both sides are connected, Skype will display the video screen.
8.22.5 I would like to set the DVP508 as a PC Camera 1. Press [MENU] on the control panel or remote control to enter the setting menu. 2. Press [] or [] to the [Storage] menu. 3. Press [] to find [USB Transfer]. 4. Press [] or [] to select [Camera]. 5. A window will be displayed, showing the [Visual Presenter V2], as shown below. 6. Click the [Visual Presenter V2]. 8.22.6 I would like to set the DVP508 as a Removable Disc 1.
The Removable Disc will select SD card if a SD card has been inserted, but if a SD card has not been inserted, the Removable Disc is internal memory Doing this will disable the [Capture] function. Suggest you return it to [Camera] mode after using this function. Please follow the 8.21.5 Steps 1 ~ 5. 8.22.7 I would like to connect Interactive Whiteboard To connect an Interactive Whiteboard, please go to the SD card or Dukanes website ( www.dukane.
Chapter 9 Connecting to Microscope 1 Mount the microscope adaptor (Optional accessory) onto the microscope. Please choose an appropriate microscope adapter. Microscope adapter accessories are applicable to eyepieces of Ø 28mm, Ø 31mm, Ø 33mm, and Ø 34mm. 2 The lens of DVP508 connects with the microscope adapter. If the eyepiece is Ø 33mm or Ø 34mm, only one Dukane microscope adapter is needed. If the eyepiece is Ø 28mm or Ø 31mm, you need two microscope adapters. (1. The Dukanes microscope adapter.
3.1. If you use the remote control or the control panel 3.1.1. Press [MENU] to enter the setting menu. 3.1.2. Press [] or [] to the [Display]. 3.1.3. Press [] to select [Mode]. 3.1.4. Press [] or [] to the [Microscope]. 4 If the image is not clear 4.1. Please adjust the focus of microscope. 4.2. Please press the control panel [AF] button to activate the auto focus. 5 Digital Zoom 5.1. If you use the remote control or the control panel 5.1.1. Press [MENU] to enter the setting menu. 5.1.2.
Chapter 10 Packing the Machine 1. Put the remote control back to the holder. 2. Fold back the camera head to align with the arm. 3. Turn the two lamp arms and the arm of camera head down and adjust them to be parallel with the platform. 4. Put the lens cap on the camera head. 5. Finally, fold the machine as in the following figure.
Chapter 11 Troubleshooting This chapter describes problems you may encounter while using DVP508. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact our distributors or service center. No. 1 Issues Boot without power Solutions Make sure you have plugged in the power cord. 2 No image output 1. Check the power. from the DVP508 2. Check the connection, Refer to User Manual Chapter 4 Installation and Connections 3.
8 do not light. like to turn on / off the lamp. DVP508 fails to store images or react. 1. Please make sure whether the stored data has reached the maximum storage capacity of DVP508 unit or SD card. 2. Please make sure if SD card is adjusted to the data protection mode (Lock). Suggest you take out the SD card from DVP508, and then adjust the SD card to the mode of Unlock. 3. Please make sure if the Capture function is set to Continuous mode or the time for capture is set to be long.
Attachment 1 World voltage & frequency 阿 富 汗 阿爾及利亞 安 哥 拉 安 地 瓜 阿 根 廷 澳 洲 Afghanistan Algeria Angola Antiqua Argentina Australia 澳 地 利 Austria 亞 巴 巴 孟 巴 比 百 述 哈 爾 馬 林 拉 多 時 達 加 貝 利 慕 Azores Bahamas Bahrain Bangladesh Babados Belgium Bermuda 玻 利 維 亞 Bolivia 波 札 那 Botswana 西 Brazil 巴 保 加 利 亞 Bulgaria 緬 甸 Burma 蒲 隆 地 Burundi 高 50 50 50 50 50 50 Chinese English 大 陸 哥 倫 比 亞 剛 果 哥斯大黎加 古 巴 塞 普 路 斯 China Colombia Congo Costa Rica Cuba Cyprus Czechoslov akia Dahomey Den mark Dominican Dubai Ecua
Chinese English 利 Chile 亞 Libya 堡 Luxembourg 50 格 陸 蘭 Greenland 曼 Oman 50 阿 50 巴 基 斯 坦 Pakistan 門 Macao 50 巴 拿 馬 Panama 馬得拉群島 Madeiral Majokca 馬約 卡 島 Island 50 巴 拉 馬 拉 加 西 Malagasy 50 菲 智 利 盧 比 森 澳 馬 拉 威 馬來 西 亞 馬 利 馬 爾 他 馬丁尼克島 茅里塔尼亞 模里 西 斯 Malawi Malaysia Mali Rep.
