User manual

English - 25
8.11 I would like to delete captured images
1. Use the remote control and press [PLAYBACK]
2. Press [] or [] or [] or [] to select the thumbnail you want you
delete.
3. Pressing [DELETE] will open a [Delete File] window.
4. Press [] or [] to select [Yes] (The default value is No).
5. Press [ENTER] to delete the selected photo.
6. Press [MENU] to exit.
8.12 I would like to automatically delete the captured
images whenever it is turned off (Auto Erase)
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Advanced] menu.
3. Press [] or [] to [Auto Erase].
4. Press [] or [] to select [ON].
5. Press [MENU] to exit.
6. It will automatically delete all captured photos when it is turned off.
8.13 I would like to record motion images (Record).
8.13.1. Setting the image quality
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [MENU] to exit.
8.13.2. Recording motion images
1. Press [RECORD] on the remote control or control panel to start
recording videos.
2. Press [RECORD] again to stop recording.
<Remark> Record sounds with the built-in microphone of the
control panel.