User manual

English - 27

8.15.2 Setting delay time

1. Press [MENU] on the remote control or control panel to enter the

setting menu.

2. Press [] or [] to the [Storage] menu.

3. Press [] to find [Delay].

4. Press [] or [] to select image switch mode between [0.5 Sec / 1

Sec / 3 Sec / 5 Sec / 10 Sec / Manual].

5. Press [MENU] to exit.

8.15.3 Activating/Stopping the slide show

<Note> Images over 8 MB, cannot be played.

If you use the remote control or the control panel:

1. Press [SLIDE SHOW] to start playing.

2. Press [SLIDE SHOW] again to stop playing.

8.16 I would like to view the X-ray film

1. Place an X-ray film to be displayed under the camera.

2. Press [Lamp] button on the control panel to switch on the Backlight (in

the sequence of arm lamp/backlight/OFF)

3. Press [AUTO TUNE] button to optimize the image.

8.17 I would like to compare images (PBP)

This function will compare and contrast a live image with a captured image.

Use Remote control

1. Press [PBP] to enter the PBP (Picture by Picture) photo selection

screen.

2. Press [] or [] or [] or [] to select the file to be compared.

3. Press [ENTER] to activate image comparison.

4. Press [] or [] to move the image left or right.

<Remark> Press [ENTER] to switch between the captured and

live images.

Captured Image

Live Image