WOOD FIREPLACE MANTEL MODEL # FBD28-M1-400-NG/MO/HC FBD28-M1-1003
PRODUCT SPECIFICATIONS 21 in 43. 46 in 39.
PACKAGE CONTENTS F A G C H B G D E PART DESCRIPTION Quantity A Top 1 B Panel 1 C Left Side Panel 1 D Ride Side Panel 1 E Base 1 F Top Triangle Panel 1 G Backboard 2 H Set Square Support 1 3
HARDWARE CONTENTS Part Description AA Cam Dowel BB Cam Lock Quantity Picture (Shown to size) Part Description Quantity 16 FF ST4 Screw 5/8 in. 18 16 GG Mounting Bracket 3 Red Key 1 CC Wall Anchor 2 DD ST4 Screw 1 3/8 in. 14 EE ST4 Screw 2 3/8 in. 2 HH Picture (Shown to size) (not actual size) WARNINGS AND CAUTIONS WARNING • When tightening screws, do not overtighten. This may cause threads to strip.
ASSEMBLY INSTRUCTIONS Fig. 1 1. Insert Cam Locks (BB) into Panel (B). Screw in Cam Dowels (AA) into Left Side Panel(C) and Right Side Panel (D). Attach LEFT SIDE PANEL (C) and Right Side Panel (D) to Panel (B) by tightening The Cam Locks (BB) as shown in Fig.1 B C AA BB D Hardware Used AA Cam Dowels x4 BB Cam Locks x4 Fig. 2 2. Insert Cam Locks (BB) into Left Side Panel (C) and Right Side Panel (D). Screw in Cam Dowels (AA) into Base (E).
Fig. 3 3. Insert Cam Locks (BB) into Left Side Panel (C), Right Side Panel (D) and Panel (B). Screw in Cam Dowels (AA) into Top (A). Attach TOP (A) into assembled frame (B,C,D,E) by tightening the Cam Locks (BB) and ST4 Screw -1 3/8 in. as shown in Fig 3. A AA B BB C D DD E Hardware Used AA Cam Dowel x6 BB Cam Lock x6 DD 4. Place insert into the mantel as shown in Fig 4. Fig. 4 Mantel Insert 6 ST4 Screw - 1 3/8 in.
ASSEMBLY INSTRUCTIONS CONTINUED (CORNER MANTEL) Fig. 5 5. Turn the fireplace Top (A) Panel over. Using the Mounting Bracket (GG) brackets that are| supplied, connect the Fireplace TOP (A) Panel to the Top Triangle Panel (F) with ST4 Screw -5/8 in. (FF) as shown in Fig 5. FF GG A F Hardware Used FF GG x 18 ST4 Screw - 5/8 in. Mounting Bracket x3 Fig. 6 6. Insert Cam Locks (BB) into Left Side Panel (C), Right Side Panel (D) and Panel (B). Screw in Cam Dowels (AA) into TOP (A).
Fig. 7 7. Attach the left and right Backboard (G) trim pieces to the back of the fireplace with ST4 Screw - 1 3/8 in. (DD) as shown in Fig 7. A DD F C E D G Hardware Used DD ST4 Screw - 1 3/8 in. x6 Fig. 8 8. Drill two holes (5/16 in.) in the corner where the fireplace is to be displayed. Drill the first hole 36 5/16 in. from the ground up; and the second hole 37 7/8 in. from the ground up as shown in Fig 8. Put the Wall Anchors (CC) in the holes by pinching the anchor tabs together.
Fig. 9 9. Attach the triangular wood block to the holes drilled in step 8 with ST4 Screw - 2 3/8 in. (EE) as shown in Fig 9. This block is used to support the Set Square Support (H). For thin walls, insert red key (HH) into wall anchor and push to “pop” open anchor wings. EE Mitered Corner Joints H HH /4 93 Baseboard 2 Hardware Used EE ST4 Screw - 2 3/8 in. x2 HH Red Key x1 Fig. 10 10.
REPLACEMENT PARTS NOTE: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty. PARTS UNDER WARRANTY Call Customer Service toll free at (877)886-5989 for referral information.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at (877)886-5989, 8:00 a.m - 4:30 p.m., EST, Monday - Friday or e-mail customerservice@usaprocom.com. Part. Description Part # AA Cam Dowel PCAM-023 BB Cam Lock PCAM-023 CC Wall Anchor ML066 - 01 DD ST4 Screw 1 3/8 in. GB/T 951 - 4 x 35 EE ST4 Screw 2 3/8 in GB/T950 - 4.
