Instructions / Assembly

8
37 7/8
1 9/16
Fig. 7
Fig. 8
Hardware Used
Wall Anchor
x2
7. Attach the left and right Backboard (G) trim pieces to the
backofthereplacewithST4Screw-1⅜ in. (DD) as shown in
Fig 7.
Hardware Used
DD
ST4 Screw - 1 ⅜ in.
x 6
8.Drilltwoholes(5/16in.)inthecornerwherethereplace
istobedisplayed.Drillthersthole365/16 in. from the
ground up; and the second hole 37 ⅞ in. from the ground up
as shown in Fig 8. Put the Wall Anchors (CC) in the holes
by pinching the anchor tabs together.
CC
Mitered Corner
Joints
A
F
C
E
D
G
DD