Instructions / Assembly

9
HH
H
EE
29 3/4
Fig. 10
9. Attach the triangular wood block to the holes drilled in step
8 with ST4 Screw - 2 ⅜ in. (EE) as shown in Fig 9. This block
is used to support the Set Square Support (H). For thin walls,
insert red key (HH) into wall anchor and push to “pop” open
anchor wings.
Fig. 9
Hardware Used
EE
ST4 Screw - 2 ⅜ in.
x 2
10.PushreplaceintocornersothattheTopTrianglePanel
(F) is resting on top of the Set Square Support (H) as shown
in Fig 10.
Baseboard
Mitered Corner
Joints
x 1
Red Key
HH
F
H