Instructions / Assembly

www.usaprocom.com
3200087-01A
FF
GG
HH
II
WARNING: When tightening screws, do not over tighten, this may cause
threads to strip. We recommend using a hand-held screwdriver rather than
a power screwdriver.
WARNING: Do not force screws into holes.
CAUTION: For corner installations(optional); if baseboards are installed
where the replace is intended to be displayed, the replace will not t ush
against the wall. For a proper ush t, it may be necessary to remove part
of the baseboard mold.
HARDWARE CONTENTS
REPLACEMENT PARTS LIST
AA
BB
CC
DD
EE
PREPARATION
Before beginning assembly of product, make sure all hardware contents parts are present. Compare parts with package contents list and diagram
on page 4. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly: Phillips Screwdriver, Flathead Screwdriver, Drill, and Tape Measure.
Item Description Part # Qty
Hardware Package HP006 1
AA Cam Dowel PCAM-023 16
BB Cam Lock PCAM-023 16
CC Wall Anchor ML066-01 2
DD ST4 Screw 1
3
/
16
" GB/T 951 4×30 8
EE ST5 Screw 2
3
/
8
" GB/T 950 5×60 2
FF ST4 Screw 5/8" GB/T 951 4×16 18
GG Connector Bracket SJ002 3
HH White Key ML067-01 1
II ST4 Screw 1
9
/
16
" GB/T 951 4×40 8