Instructions / Assembly

www.usaprocom.com
5200087-01A
ASSEMBLY INSTRUCTIONS
5. Fasten the wooden support brackets attached to the top of the
mantel assembly to the Top (A) with ST4 Screw 1
9
/
16
" (II) as shown
in Figure 5.
Figure 6
Figure 5
Figure 7
Hardware Used
II
4) ST4 Screw 1
9
/
16
"
6. After assembling the mantel, lift to the upright position. Carefully,
push the replace insert from the front of the mantel as shown in
Figure 6.
7. Position the replace to the desired location as shown in Figure 7.
Fireplace Insert
Wall
II
A