Instructions / Assembly

www.usaprocom.com
200087-01A6
ASSEMBLY INSTRUCTIONS
Figure 10
Figure 11
II
DD
4) ST4 Screw 1
9
/
16
"
8) ST4 Screw 1
3
/
16
"
Hardware Used
Hardware Used
10. Fasten the wooden support brackets attached to the top of the
mantel assembly to the Top (A) with ST4 Screw 1
9
/
16
" (II) as shown
in Figure 10.
11. Attach the left and right Backboard (G) trim pieces to the back of
the replace with ST4 Screw 1
3
/
16
" (DD) as shown in Figure 11.
II
A
G
DD
Figure 8
Figure 9
Hardware Used
Hardware Used
AA
FF
BB
GG
6) Cam Dowel
18) ST4 Screw 5/8"
6) Cam Lock
3) Connector Bracket
8 . Turn the replace Top Panel (A) over. Using the supplied Connector
Brackets (GG), attach the Mantel Top (A) to the Top Triangle Panel
(H) with ST4 Screw 5/8" (FF) as shown in Figure 8.
9. Insert Cam Locks (BB) into Panel (B), the Left Upper Panel (C)
and the Right Upper Panel (D). Screw Cam Dowels (AA) into Top
(A). Attach Top (A) into assembled frame by tightening the Cam
Locks (BB) as shown in Figure 9.
CORNER APPLICATION
A
H
GG
FF
BB
AA
A
C
D
B