Instructions / Assembly
4
www.factorybuysdirect.com
200235-02A
INSTALLING LOGS
WARNING: Failure to position the parts in accordance with these
diagrams or failure to use only parts specically approved with this
heater may result in property damage or personal injury.
CAUTION: After installation and periodically thereafter, check to
ensure that no yellow ame comes in contact with any log. With the
heater set to High, check to see if yellow ames contact any log. If
so, reposition logs according to the log installation instructions in
this manual. Yellow ames contacting logs will create soot.
It is very important to install the logs exactly as instructed. Do not modify logs. Use only logs
supplied with heater.
Each log is marked with a number. This number will help you to identify the logs when installing.
After installing logs, add decorative cinders around the grate base, do not place any decora-
tive cinders on logs or burner.
Middle Log
Bracket
CHASSIS SHOWN
1. Place log #1 onto shelf at rear of the grate
assembly. The features on bottom of log
will correctly locate the log.
2. Insert log #2 into slot in middle log bracket.
Log # 3
Log # 2
Log # 1
Front Log Bracket
Rear Log
Bracket