Installation Guide
www.factorybuysdirect.com
13200254-01A
CARE AND MAINTENANCE
To protect your gas replace burner system 
and keep it operating safely for years to come, 
maintain, clean and inspect it regularly. Follow 
these  instructions  at  the  beginning  of  each 
replace season and as needed throughout 
the  year,  depending  on  your  usage  pattern 
and environmental conditions in your home. 
More frequent cleaning and maintenance may 
be necessary when burning propane gas than 
with natural gas.
•  Check and readjust the burner orice.
•  Clean  and  test  the  ignitor  and  pilot  (if 
equipped).
MAINTENANCE
Once installed and  operating  properly, your 
burner will require regular maintenance. You 
should  inspect  your  burner  and  control  for 
the following:
1.  Moisture  may  cause  the  glass/gems  in 
your burner pan to settle. To improve the 
burn, use a screwdriver or at-blade knife 
to carefully  stir  the glass, loosening  the 
material. Clear up any spills.
2.  Inspect control and pilot (if  equpped)  to 
be sure they are free of dirt of debris.
3.  Check the burner ports and burner orice 
to make sure  they  are free from debris. 
Blocked  burner  ports  and  orices  may 
result in a re.
4.  Flames should be blue at  the  base and 
a combination of blue/yellow at the body 
and  tips.  The  ames  should  be  16"  to 
18" tall. Inspect the ames periodically. If 
they appear different, contact a qualied 
service technician or your gas supplier to 
correct the problem.
CLEANING
•  Keep the area around the appliance clean 
and clear of debris.
•  Vacuum or use compressed air from a can 
or compressor to clean out the burner as-
sembly, pilot assembly and pilot air intake 
openings (if equipped) and burner orices. 
Blockage  can  affect  the  operation  of  the 
pilot assembly.
•  Occasionally,  you  may  use  a  soft  bristle 
brush to clean.
•  Once every year a qualied agency or certi-
ed chimney sweep should examine and 
clean the venting system of the replace.
TECHNICAL SERVICE
You may have further questions about installation, operation, or troubleshooting. If so, contact 
Factory Buys Direct at 1-855-607-6557.
When calling, please have your model and serial numbers of your heater ready.










