Installation Guide

www.factorybuysdirect.com
200247-01A12
Vermiculite and Glowing Ember
Log #1
Log #8
Log #9
Log #10
Log #2
Log #3
Log #4
Log #5
Log #7
Log #6
MODEL FNVL30-1
1. Place vermiculite into burner pan. Pull
glowing ember loosely, and sprinkle uni-
formly on the surface of vermiculite as
shown below.
2. Install grate steps (see Figure 8, page 10).
3. Place log #1 on the grate steps.
4. Place log #2 on the left, front of the grate
base.
5. Place log #3 on the right, front of the grate
base.
INSTALLATION
6. Place log #4 on log #1 and log #2.
7. Place log #5 on log #1 and log #2.
8. Place log #6 on log #5 and log #3.
9. Place log #7 on log #1 and log #3.
10. Place log #8 on log #1 and log #3.
11. Place log #9 on log #4 and log #5.
12. Place log #10 on log #7 and log #8
Figure 15
Figure 16
Figure 17