User Manual

INSTRUCTION MANUAL
5
Do not kink or pinch the power supply cord of Wine Cooler.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the Wine Cooler to be leveled in order to work properly. You may need to make
several adjustments to level it.
All installation must be in accordance with local plumbing code requirements.
Make certain that the pipes are not pinched or kinked or damaged during installation.
Check for leaks after connection.
Never allow children to operate, play with or crawl inside the Wine Cooler.
Although the unit has been tested at the factory, due to long-term transit and storage, the first
batch of cubes must be discarded.
Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
Do not use this apparatus for other than its intended purpose.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for their
safety.
Do not use the appliance if the plug, the mains cord or the appliance itself is damaged. If the
mains cord is damaged, you must have it replaced by the manufacturer, or an authorized service
centre or similarly qualified persons in order to avoid a hazard.
Children should be supervised to ensure that they do not play with the appliance. Keep the
mains cord out of the reach of children. Do not let the mains cord hang over the edge of the table
or worktop on which the appliance stands.