User's Manual

English

Use the RC buttons "LEFT", "RIGHT", "UP", "DOWN", "ENTER", "RETURN" to navigate through the player menu.

Use the "POP UP MENU" RC button to show the list of available commands. Use the "INFO" RC button to show the

information about the selected item.

Quick Setting of Video Output Mode

The “REC” RC button allows quick setting of video output mode without entering the player setup

menu. This way of video output conﬁ guration may be required if you see no picture on the screen after

connecting your player to a TV.

Press the “REC” RC button and then one of the RC buttons “1”, “2”, “3”, “4”, or “5” to switch to one of the following

video output modes respectively:

1. Composite PAL

2. Composite NTSC

3. HDMI, 480i, 60 Hz

4. HDMI, 720p, 60 Hz

5. HDMI, 1080i, 60 Hz

After you see a picture on the TV, press the “ENTER” RC button, and then go to the player setup menu to perform a

more precise conﬁ guration of the video output mode if needed.

NOTE: The procedure of quick setting of video output mode can not be used during playback and in some other

cases. T

o ensure this procedure can be used, switch the player off, then switch the player on, and the wait about 1

minute to ensure the player loading is ﬁnished.

After that press «STOP» RC button to ensure playback is stopped.

Then use «REC» RC button.