Manual

FLOOR STAND KIT
ASSEMBLY INSTRUCTIONS
Kit #240010266
WARNING
Fire, explosion, asphyxiation and electrical shock
hazard. Improper installation could result in death or
serious injury. Read this instruction and understand
all requirements, including requirements of authority
having jurisdiction, before beginning installation.
Installation not complete until appliance operation
is veried per Installation, Operation & Maintenance
Manual provided with boiler.
!
P/N 240010265 Rev. B [08/2013]
Kit installation shall be completed by qualied agency.
Figure 1 - Floor Stand Exploded View
Description Qty
Left Upright - not interchangeable 1
Right Upright - not interchangeable 1
Base Leg 2
Brace 2
Upper Cross Member 1
Lower Cross Member 1
Base Foot 4
1/4 - 20 x ⅝ Serrated Hex Flange Head Bolt 26
1/4 - 20 Serrated Hex Flange Head Nut 26
5/16 - 18 x ¾ Serrated Hex Head Bolt (Use for Boiler
Wall Mount Bracket attachment)
4
5/16 - 18 Serrated Hex Flange Head Nut (Use for
Boiler Wall Mount Bracket)
4
Note: Kit does not include Boiler Wall Mount Bracket (shown
in Figure 8) - it is included with your boiler. You will need to
locate it for use with this kit (step 9).
Upper Cross
Member
Left
Upright
Right
Upright
Bolts
Brace
Lower Cross
Member
Base
Leg
Base
Foot
WARNING
Fire, explosion hazard. Mount boiler vertically or
slightly tilted backward to insure proper function of
low water cutoff. Failure to follow these instructions
could result in death or serious injury.
CAUTION
Boiler weight exceeds 75 pounds (34 kg). Do not
lift boiler onto stand without assistance.
!
NOTICE
Lift boiler using chassis. Using front jacket, vent
piping, water or gas ttings to lift boiler may cause
damage to the boiler.
Nuts
Boiler installation shall conform to requirements of
authority having jurisdiction or in absence of such
requirements:
• United States
• National Fuel Gas Code, ANSI Z223.1/NFPA 54 .
• National Electrical Code, NFPA 70.
• Canada
• Natural Gas and Propane Installation Code,
CAN/CSA B149.1.
• Canadian Electrical Code, Part I, Safety Standard
for Electrical Installations, CSA C22.1
Overall Dimension see Figure 9 page 4.
WARNING
This stand is capable of supporting one (1) boiler
only. Any changes to this stand or installation could
result in serious injury or death.