CBM535Q ® CRY BABY® MINI 535Q WAH
EXTERNAL CONTROLS 5 1 2 1 2 3 4 5 3 4 BOOST switch engages boost set by VOLUME control RANGE SELECTOR switch selects frequency range VOLUME knob sets gain boost up to +16dB Q knob adjusts wah intensity FOOTSWITCH toggles effect on/bypass RANGE SELECTOR 1 2 3 4 1 2 3 4 270Hz—1300Hz 320Hz—1650Hz 360Hz—1840Hz 420Hz—2100Hz CBM535Q CRY BABY® MINI WAH 2
BASIC OPERATION POWER The Cry Baby Mini 535Q Wah is powered by one 9-volt battery (remove bottom plate to install), or an AC adapter such as the Dunlop ECB003/ECB003EU, or the DC Brick™ and Iso-Brick™ power supplies. OPERATION 1. Run an instrument cable from your guitar to the CBM535Q’s INSTRUMENT jack and another instrument cable from the CBM535Q’s AMPLIFIER jack into your amplifier’s input. 2. Push the toe of the pedal down until you feel a “click” to turn the pedal on/off. 3.
SPECIFICATIONS IMPEDANCE Input Impedance 1MΩ Output Impedance ~1.5K Ohm SIGNAL TO NOISE RATIO* Heel Down 90 dBV Toe Down 97 dBV WAH RANGE SELECTOR Range Selector Switch Position (1 towards heel, 4 towards toe) 1st Position 270Hz—1300Hz 2nd Position 320Hz—1650Hz 3rd Position 360Hz—1840Hz 4th Position 420Hz—2100Hz Filter Gain** 15 dB Boost Control Range 0.1 dB to 17 dB Bypass True Hardwire Current Draw 2.
