Instruction manual

~30~
No. Name Description LED Display /
Example
1
EMERGENCY Stop all the actions of the machine. Except
when “HOT” shows on the LED DISPLAY.
“STOP” (flashing)
2
STAND BY /
LED
Temporarily lowers the temperature of glue
tank so it won’t burn the glue when the
machine is not operated.
STBY00
3
CLOSE Close clamp.
4
LED DISPLAY The amount of books bound. ____100
1)Theamountofbooksbound.
2) Operating status. BIND
3) Perform self-test and stir the hot melt
glue.
S-TEST
4) Error messages. ERR = L1
5
CLEAR Clear the display counter for books bound. ____0
6
TAPE Tape Mode, LCD display “TAPE MODE” ___25
7
START / LED Indicates the “START” button is ready for
proceeding to the next operation.
8
OPEN Open clamp.
9
FUNCTION /
LED
Select one of the function modes -
MANUAL, AUTO, or PAD.
One of the mode
indicators will be lit.
10
NOTCH / LED Select the notching function during the
bookbinding operation.
4.3 Emergency Stop
When the emergency and Safety function is started, the machine will be stopped immediately and reset all
commands, the motor is stopped too. During machining, if any malfunction occurs, press this switch to stop
all motion. When restarting machine remember to turn this switch to the right to release it.