Service manual

1 PAPER FEED SECTION
5-5
DUPLO DF-755 86V-M12D0-0
4) Make the solenoid on and press the plunger against the solenoid firmly to lower the solenoid
lever completely.
[1]
Solenoid
[2]
Plunger
[5]
Solenoid lever
5) When the solenoid lever has reached its lowest position, adjust the position of the solenoid
and secure it to the solenoid bracket so that the clearance between the protruding part and
the tip of the solenoid lever is [C].
[1]
Solenoid
[3]
Clutch case
[4]
Protruding part
[5]
Solenoid lever
[6]
Solenoid bracket
[C]
1 to 1.5 mm (0.04 to 0.06 inch)
6) Check that the plunger moves smoothly and the solenoid lever returns completely.
[2]
Plunger
[5]
Solenoid lever
[4]
[3]
[5]
[A]
OFF
[B]
ON
[6]
[5]
[2]
[1]
[C]