Service manual

3 EXTERNAL COVER SECTION
5-18
DUPLO DF-755 86V-M12D0-0
b. First folding plate switch (SW2), second folding plate switch (SW3)
1) Remove the first folding plate and the second folding plate from the machine.
2) Make the following adjustment so that the SW2 and SW3 are activated when the first
folding plate and the second folding plate are installed to the machine.
• Secure the switch bracket at a position where the side of the folding plate presses down
the actuator of the interlock switch to activate the switch.
[1]
Actuator
[2]
Switch bracket
• Secure the clearance [A] between the actuator and the switch body when the switch is
activated.
[1]
Actuator
[3]
Switch body
[A]
Clearance: 0.5 to 1.0 mm (0.02 to 0.04 inch)
[A]
[1]
[2]
[3]