SDS

MATERIAL SAFETY DATA SHEET FILE NO.: 069
AIRTITE WHITE SILICONIZED ACRYLIC CAULK MSDS DATE: 2/18/11
SUPERCEDES: NEW
PAGE 3 OF 5
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE LIMITS:
ETHYLENE GLYCOL: 100 ppm Ceiling ACGIH
PERSONAL PROTECTION:
RESPIRATORY PROTECTION: Use with adequate ventilation. None needed if concentrations are kept
below the listed exposure limits.
SKIN PROTECTION: Chemical resistant gloves are recommended for prolonged exposure.
Clothing should be such that it protects skin from direct contact with
sealant.
EYE PROTECTION: Safety glasses with side shields (ANSIZ87.1 or approved equivalent).
OTHER PROTECTIVE EQUIPMENT: None required.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: Paste consistency. Off white.
ODOR: Sweet Acrylic , with a mild ammonia odor
PHYSICAL STATE: Paste
pH AS SUPPLIED: 7.5 - 9
BOILING POINT: > 200°F
FREEZING POINT: < 32°F
VAPOR PRESSURE (mmHg): 25 mm Hg @ 68°F
VAPOR DENSITY (AIR = 1): > than 1
EVAPORATION RATE: Slower than Ether
WATER SOLUBILITY: Dispersible
WEIGHT PER GALLON: 13.5 – 14.5 Lbs/Gallon.
% VOLATILE BY VOLUME: 20-40%
Non-chemically curing Sealant
VOCs (less exempt solvents) < 1.5%
SECTION 10: STABILITY AND REACTIVITY
STABILITY: Stable (keep below 200°F)
CONDITIONS TO AVOID: Store away from strong oxidizers
INCOMPATIBILITY (MATERIAL TO AVOID): Strong oxidizers
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: None known
HAZARDOUS POLYMERIZATION: Will not occur
SECTION 11: TOXICOLOGICAL INFORMATION
ACUTE DATA: No toxicity data are available for this material. Section 3 is based on profiles of similar materials.