Instructions / Assembly

WFPF13003B 4 V4.1I
STEP 2
Configure Your System
See the System Configuration Chart below to determine how you will configure your filter system and to identify the additional
parts and tools you will need for installation.
NOTE: For galvanized piping, consult a professional plumber.
Materials Needed for 3/4” Diameter Housing Inlet/Outlet Ports
QUANTITY
1”
COPPER
PIPE
2
No Individual Fitting.
It may be made up of:
- 1” x 1” sch 40 coupling
- 1” x 3/4” sch 40 bushing
- 3/4” sch 80 nipple (2 each)
- 1” CTS QC Adapter (WATTS
WaterPEX)
3/4” O.D. Tube x 3/4” M.I.P.
Compression Male Adapter
or
3/4” MPT x 3/4” CTS QC
Adapter (WATTS WaterPEX)
3/4” NPT x 3/4” Tube
Male Adapter
PVC Slip Type
3/4” NPT x 1” Tube
Male Adapter
PVC Slip Type
3/4”
PVC
PIPE
TOOLS
1"
PVC
PIPE
Pipe Cutter or Hacksaw
2 Adjustable Wrenches
Tape Measure
Pipe Cutter or Hacksaw
2 Adjustable Wrenches
Tape Measure
Pipe Cutter or Hacksaw
2 Adjustable Wrenches
Tape Measure
Pipe Cutter or Hacksaw
2 Adjustable Wrenches
Tape Measure
SUPPLIES
Plumber’s Tape Plumber’s Tape
Plumber’s Tape
PVC Cleaner
PVC Adhesive
Plumber’s Tape
PVC Cleaner
PVC Adhesive
3/4”
COPPER
PIPE
During filter cartridge remplacement it is necessary to shut off
the water supply and purge the water lines. Adding shut-off
valves will isolate the system from the supply line and household
water. In this way, filter cartridge replacement is faster with less
mess and hassle.
NOTE: Valves shown in diagrams are not included but can be
purchased at a local hardware store.
WFPF13003B
3
V4.0
STEP
2
Configure Your System
See the System Configuration Chart to determine how you will configure your Filter System and to identify the additional parts
and tools you will need for installation.
NOTE: For galvanized piping consult a professional plumber.
Materials Needed For 3/4" Diameter Housing Inlet /Outlet Ports
______________________________________________________________________________________________________________________________________
2 3/4" O.D. Tube x 3/4" M.I.P No Individual Fitting. 3/4" NPT x 3/4" Tube 3/4" NPT x 1" Tube
Compression Male Adapter It may be made up of: Male Adapter Male Adapter
or - 1" x 1" sch 40 coupling PVC Slip Type PVC Sli
p Type
3/4" MPT x 3/4" CTS QC - 1" x 3/4" sch 40 bushing
Adapter (WATTS WaterPEX) - 3/4" sch 80 nipple (2 each)
- 1" CTS QC Adapter
(WATTS WaterPEX)
______________________________________________________________________________________________________________________________________
TOOLS
_______________________________________________________________________________________________________________________
_______________
Pipe Cutter or Hacksaw Pipe Cutter or Hacksaw Pipe Cutter or Hacksaw Pipe Cutter or Hacksaw
2 Adjustable Wrenches 2 Adjustable Wrenches 2 Adjustable Wrenches 2 Adjustable Wrenches
Tape Measure Tape Measure Tape Measure Tape Measure
______________________________________________________________________________________________________________________________________
SUPPLIES
______________________________________________________________________________________________________________________________________
Plumber’s Tape Plumber’s Tape Plumber’s Tape Plumber’s Tape
PVC Cleaner PVC Cleaner
PVC Adhesive PVC Adhesive
______________________________________________________________________________________________________________________________________
QUANTITY
1" COPPER PIPE
1" PVC PIPE3/4" PVC PIPE
3/4" CO
PPER PIPE
GOOD
BETTER
BEST
NOTE: Valves shown in diagrams are not included but
can be purchased at a local hardware store.
During filter cartridge replacement it is necessary to shut
off the water supply and purge the water lines. Adding
shut-off valves will isolate the system from the supply
line and household water. In this way, filter cartridge
replacement is faster with less mess and hassle
.
A
A
VALVE
VALVE
VALVE
2
A
2