Installation Guide

www.Dura-Gate.com
1035 A Cleaner Way
● Huntsville, AL 35805
256.883.0404 Phone
● 256.883.9290 Fax
”No more irritating dragging, sagging, or warping gates!”
DURA-GATE INSTALLATION INSTRUCTIONS
Thank you for purchasing Dura-Gate
TM
. . . fence gates durable for life. Get ready to experience life with no more
irritating dragging, sagging or warping gates!
To install your Dura-Gate™, follow the instructions below. If you have any questions, you may view the Installation
Video that is available at our web site, www.Dura-Gate.com
. Or, feel free to contact us via the phone numbers listed
above or by email at [e-mail].
Tools required for installation:
 Cordless drill with ½”, 7/16”, 3/8” sockets
 3/16” Drill bit (per drill all wood screws)
 Skill Saw
Instructions:
Step 1)
Take down and properly dispose of
the old gate.
Step 2)
Unpack your Dura-Gate™ frame,
hinges, latch assembly, screws.
Step 3)
Depending upon the size Dura-Gate
TM
you purchased, you may have to install
the horizontal rail using the screws
provided.
Step 4)
Now, take a moment to accurately
measure the gate opening.
Step 5)
Adjust the Dura-Gate™ to 1-1/4” to 1-
1/2” smaller than opening width and
allow an equal distance vertically from
the top and bottom of the post. *
Step 6)
Now screw the frame into place.
* NOTE: Make sure you allow for any change from top to bottom by adjusting the gate frame itself.