Instructions / Assembly

Torsion Spring

Instruction

Determine Torsion Spring Size

CHOOSE SPRING WIRE GAUGE: to determine

spring wire gauge, measure the length of 20

coils from the middle section of your existing,

unstretched spring

DETERMINE INNER DIAMETER: the inner diame-

ter of the spring is listed on the outside of the

spring cone (most = 1.75" or 2")

MEASURE TOTAL SPRING LENGTH: measure the

length from coil to coil to ﬁnd the spring's length

(do not include spring drums in measurement)

SELECT APPROPRIATE SPRING WIND: choose

between left or right spring wind, or select

2-pack for the pair (looking from inside the

garage, left wind installs on right side of the

door, right wind installs on the left side of the

WARNING!

INSTALLATION BY PROFESSIONAL IS HIGLY RECOMMENDED TO PREVENT SERIOUS INJURY.

HIGH SPRING TENSION CAN CAUSE SERIOUS INJURY OR DEATH. DO NOT adjust, repair or

remove springs or parts to which springs are connected, such as steel brackets, cables, wood

blocks, red colored fasteners or other parts of the counterbalance system. Adjustments or

repairs must ONLY be made by a trained door systems technician using proper tools and

instructions.

DURALIFTHARDWARE.COM