Replacement Part List

6' Picnic Table
6
Insert one cross brace / leg assembly into brackets on underside of table top with cross brace closest to table
end. Using four 2¼" bolts, washers and nuts, fasten assembly to table top. Repeat with second cross brace /
leg assembly for opposite end of table.
Using one 2¼" bolt, washers and nut, bolt one 26½" diagonal brace (part 8) to center of each cross brace. In
center of table, overlap free ends of diagonal braces and drill two ⅛" holes through braces and into center
brace. Using two 1½" screws, fasten both diagonal braces to center brace.
Position seat assemblies over cross braces and line up bolt holes of brackets to holes in cross brace. Using
four 2¼" bolts, washers and nuts per seat assembly, fasten seat assembly to cross brace.