Replacement Part List

ManualsBrandsDura-Trel ManualsOutdoors72 in. L x 11 in. W x 16 in. H 6 ft. White Vinyl Patio Bench

TOOLS NEEDED:









BENCH SEAT ASSEMBLY

 

#11136 



 

  

  

 

 

 

   



 

BENCH BACK ASSEMBLY



   

  



 

BENCH LEGS AND SUPPORT ASSEMBLY



 





  





  

 



  

 

   

  

 

Summary of content (8 pages)

PAGE 1
#11136 PARK/PIER BENCH ASSEMBLY INSTRUCTIONS TOOLS NEEDED: Drill with #2 Phillips Bit or Phillips Screwdriver 7/ 16" Wrenches or Sockets File BENCH SEAT ASSEMBLY (Refer to Upper portion of Drawing 1) On a flat non-abrasive surface lay out the three 1 ½ x 5 ½ x 60" seat rails with screw pilot holes facing upwards (seat rails will have pilot holes in the center of the rails for center brace). Place the two seat brackets on rails as shown; fasten brackets to rails using¼" screws.
PAGE 2
SEAT ATTACHMENT (Refer to Drawing 3) Lay the bench seat assembly from Drawing 1on the edge of a table or workbench. Place the bench leg/support assemblies into the brackets as shown (make sure the bench support pieces face the outside of completed bench). Fasten each side with 2 ¼" bolts, washers and nylock nuts (bolt head should face the outside of the completed bench). Apply glue to the end caps for the bottom of legs, using the 5 5/8" angled end caps for front legs and 5 ½" end caps for back legs.
PAGE 3
P.O. BOX l ':2 ':2 Sheboygan Falls, WI 53085 Toll Free: 877-258-6020 VINYL LAWN & GARDEN PRODUCTS Please call manufacturer direct with questions concerning mzsszng or defective parts at Toll Free: 877-258-6020. Dura-Trel, Inc. products are warranted to be free from manufacturing defects resulting in clelaminating, peeling, flaking corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the PVC to change to its natural color for a period of 20 years from the date of purchase.
PAGE 4
1 ½"Screws 7/8" x 1.5'' End Cap � 3/4"Screws 14" Brackets 7/8" x 1.5" x 4" End Cap /! I 3/4"Sc,ew 7/8" x 1.5" x 5.5" End Cap 4" Bracket n! � I I x2 I � Dura-Trel, Inc. P.O.
PAGE 5
1/2" End Cap �----r.i__ \7 .- �----e--_ (i::_�--- c-:� . -e- - - - ---e----� ---e-- __ -@ --g. ___ -@ 5 5/8" Angled Leg End Cap / 1/4" X 3 1/2" Bolts Washers and Nylock Nut Dura-trel, Inc. P.O. Box 122, Sheboygan Falls, WI 53085 Note: Repeat for oppostie side, placing the support on opposite side of legs.
PAGE 6
' 7/8" x 1.5 x 5 5/8" Angled Leg End Cap • � Drawing 2 7/8" x 1.5 x 5.5" End Cap � @ � 2 1/4" Bolts, Washers, and Nylock Nuts Dura-Trel, Inc. Note: If Bench is being used with Bench Anchor Kit, Do NOT apply caps to bottom of legs P.O.
PAGE 7
2 1/4" Bolts, Washers, and Nylock Nuts _B- 3/8" x 1.5'' x 2" End Ca Drawing 2 '®) '®) � � 7/8" x 1.5 x 4" End Cap Dura-Trel, Inc. P.O. Box 122, Sheboygan Falls, WI 53085 Note: Must apply center caps before attaching top back rail.
PAGE 8
PACKING LIST II #11136 pARK/PIER BENCH II PARTS CONTAINED: QTY. 3 2 2 2 2 1 1 4 1 2 4 8 2 4 2 2 40 6 8 8 16 32 1 PART NO.