Instructions / Assembly

ManualsBrandsDura-Trel ManualsKitchen64 in. x 28 in. Mocha Vinyl PVC Camelot Trellis

Model#

11140 (M)

Assembly Instructions

Part # Description

1 2" sq. x 59½ Left Post

2 2" sq. x 59½ Right Post

3 ⅞ x 1½ x 27½" Center Cross Rail

4 ⅞ x 1½ x 27½" Bottom Cross Rail

5 1 x 1 x 58" Vertical Rail

6 1 x 1 x 55" Vertical Rail

7 14" Ground Anchor

8 Hardware Bag

(includes:)

2" sq." Post Cap

1 x 1" Arrowhead Cap

¾" Painted Screw

#8 - 1" Painted Self Tapping Screw

(for ground anchors)

PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.

IMPORTANT: Check boxes for Contents Listed

Check inside of parts as some parts are packaged

inside of others

In the event of missing, damaged or defective parts

please call our customer service dept. at 1-877-258-6020

When assembling components, place on a clean, flat

non-abrasive surface to avoid scratches

…

Battery or Electric Drill with #2 phillips bit

… PVC, Super, or Crazy Glue

…

Hammer or Rubber Mallet (recommended)

…

Straight Blade Screwdriver (if combining trellis with planter)

115 Vision Parkway 1-877-258-6020

P.O. Box 122 www.dura-trel.com

Sheboygan Falls, WI 53085 sales@dura-trel.com

Tools Required

General Information

Camelot Trellis

Qty

Summary of content (5 pages)

PAGE 1
Camelot Trellis Model# Part # 1 2 3 4 5 6 7 8 General Information 11140 (M) Assembly Instructions Description 2" sq. x 59½ Left Post 2" sq. x 59½ Right Post ⅞ x 1½ x 27½" Center Cross Rail ⅞ x 1½ x 27½" Bottom Cross Rail 1 x 1 x 58" Vertical Rail 1 x 1 x 55" Vertical Rail 14" Ground Anchor (includes:) Hardware Bag Qty 1 1 8 1 1 2 2 1 2" sq.
PAGE 2
Warranty Statement 20 Year Guarantee Please call manufacturer direct with questions concerning missing or defective parts at Toll Free: 877-258-6020. Dura-trel, Inc. products are warranted to be free from manufacturing defects resulting in delaminating, peeling, flaking, corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the PVC to change to its natural color for a period of 20 years from the date of purchase.
PAGE 3
1 Lay out right post (part 2). Starting at bottom (6" from bottom) insert bottom cross rail (part 4) and center cross rails 2 Slide left post (part 1) over corresponding cross rails. 3 Insert 58” vertical rail (part 5) through center hole of cross rails.
PAGE 4
5 Insert 55” vertical rails (part 6) through Using ¾" painted screws, screw together trellis. Be sure that all parts are fully inserted into posts before securing. Instruction Text Using PVC, super or crazy glue, glue post caps onto posts and arrowhead caps onto vertical rails. 6 If combining with Model# 11124 Large Planter Box to make a planter trellis, use a straight blade screwdriver to pop off two 2" sq. post caps of one long side of the planter and slide trellis over the planter legs.
PAGE 5
Figure 1 Figure 2 Trellis Arbor Option 1 (soft ground) Slide one 16 inch ground anchor into bottom of each post. Slide ground anchor up to bottom cross rail. Using two 1 inch self-tapping screws per post, screw the post to the ground anchor (figure 1). When fastening, use one screw on each opposite side as shown in the drawing. Once ground anchors are attached to posts, push trellis/arbor into ground. This method can also be used for installation into hard ground if area thourougly drenched with water.