Installation Guide

Camelot Trellis

Lay out right post (part 2). Starting at

bottom (flared end), insert bottom cross

rail (part 4) and center cross rails (part 3).

Slide left post (part 1) over corresponding

cross rails.

Insert 58” vertical rail (part 5) through

center hole of cross rails.

PAGE 1
Lay out right post (part 2). Starting at bottom (flared end), insert bottom cross rail (part 4) and center cross rails (part 3). 2 Slide left post (part 1) over corresponding cross rails. 3 Insert 58” vertical rail (part 5) through center hole of cross rails.
PAGE 2
4 Insert 55” vertical rails (part 6) through remaining holes in cross rails. 5 Using ¾" kappet screws, screw together trellis. Be sure that all parts are fully inserted into posts before securing. Instruction Text Using PVC, super or crazy glue, glue post caps onto posts and arrowhead caps onto vertical rails. 6 If combining with Model# 11124 Large Planter Box to make a planter trellis, use a straight blade screwdriver to pop off two 2" sq.