Installation Guide

Estate Trellis

Lay out one right post (part 2). Starting at

bottom (end with hole 4” from post end),

insert cross rails from shortest to longest (part

3-14)

Slide left post (part 1) over corresponding

support and cross rails.

Starting with center hole, insert 84” vertical

rail (part 15) through cross rails.

PAGE 1
Lay out one right post (part 2). Starting at bottom (end with hole 4” from post end), insert cross rails from shortest to longest (part 3-14) 2 Slide left post (part 1) over corresponding support and cross rails. 3 Starting with center hole, insert 84” vertical rail (part 15) through cross rails.
PAGE 2
4 Working outward away from center, insert 74” vertical rails (part 16) through cross rails. 5 Insert 45½” vertical rails (part 17) through cross rails. 6 Insert 17½” vertical rails (part 18) through cross rails.
PAGE 3
7 Using ¾" paintedscrews, screw together trellis. Be sure that all parts are fully inserted into posts before securing. 8 Using PVC, super or crazy glue, glue post caps onto posts and arrowhead caps onto vertical rails. 9 To secure to wall, slide 6” screw through clear screw backer. Insert screw through pre-drilled hole in post. To set trellis away from wall, slide screw through spacer tube. After securing, snap screw cap over screw backer.