Installation Guide

Cambridge Trellis

Instruction Text

Lay out one right post (part 2). Starting at

bottom, insert one top/bottom cross rail

(part 3) and six horizontal slats (part 4).

Slide left post (part 1) over corresponding

cross rail and slats.

Weave remaining two vertical slats (part 5)

through horizontal slats opposite of center

vertical slat. Insert ends into remaining

holes of top/bottom cross rail.

Weave one vertical slat (part 5) through

horizontal slats. Insert end into center

hole of top/bottom cross rail.

PAGE 1
Lay out one right post (part 2). Starting at bottom, insert one top/bottom cross rail (part 3) and six horizontal slats (part 4). 2 Slide left post (part 1) over corresponding cross rail and slats. 3 Weave one vertical slat (part 5) through horizontal slats. Insert end into center hole of top/bottom cross rail. Instruction Text 4 Weave remaining two vertical slats (part 5) through horizontal slats opposite of center vertical slat. Insert ends into remaining holes of top/bottom cross rail.
PAGE 2
5 Separate tops of post just enough to insert remaining top/bottom cross rail (part 3) and bent trellis top (part 6 Using four 1¼” screws per post, screw together trellis. Be sure that all parts are fully inserted into posts before securing. 7 Using PVC, super or crazy glue; glue post caps onto posts.