Instructions / Assembly

ManualsBrandsDura-Trel ManualsKitchen76 in. x 28 in. Mocha Vinyl PVC Cambridge Trellis

Model#

11172

Assembly Instructions

Part # Description

max 5 x 3.5

2" sq. x 74" Left Post

2 2" sq. x 74" Right Post

3 ⅞ x 3 x 27½" Top/Bottom Cross Rail

4 ¼ x 1½ x 63" Vertical Slat

5 ¼ x 1½ x 27½" Horizontal Slat

6 ⅞ x 1½ x 27½" Bent Top

7 Hardware Bag

(includes:)

2" sq." Post Cap

1¼" Painted Screw

Trellis Ground Anchor Kit (includes:)

16" Steel Ground Anchor (L-Shaped)

#8 - 1" Painted Self Tapping Screw

PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.

IMPORTANT: Check boxes for Contents Listed

Check inside of parts as some parts are packaged

inside of others

In the event of missing, damaged or defective parts

please call our customer service dept. at 1-877-258-6020

When assembling components, place on a clean, flat

non-abrasive surface to avoid scratches

…

Battery or Electric Drill with #2 phillips bit

…

Hammer or Rubber Mallet (recommended)

… PVC, Super, or Crazy Glue

150 Birch Road

P.O. Box 122

Sheboygan Falls, WI 53085

www.dura-trel.com

sales@dura-trel.com

Tools Required

1-877-258-6020

General Information

Qty

Cambridge Trellis

Summary of content (5 pages)

PAGE 1
Cambridge Trellis Model# 11172 Part # max 5 x 3.5 Assembly Instructions Description Qty 1 2" sq. x 74" Left Post 1 2 2" sq. x 74" Right Post 1 3 ⅞ x 3 x 27½" Top/Bottom Cross Rail 2 4 ¼ x 1½ x 63" Vertical Slat 3 5 ¼ x 1½ x 27½" Horizontal Slat 6 6 ⅞ x 1½ x 27½" Bent Top 1 7 Hardware Bag 1 (includes:) 2" sq.
PAGE 2
Warranty Statement 20 Year Guarantee Please call manufacturer direct with questions concerning missing or defective parts at Toll Free: 877-258-6020. Dura-trel, Inc. products are warranted to be free from manufacturing defects resulting in delaminating, peeling, flaking, corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the PVC to change to its natural color for a period of 20 years from the date of purchase.
PAGE 3
1 Lay out one right post (part 2). Starting at bottom, insert one top/bottom cross rail (part 3) and six horizontal slats (part 4). 2 Slide left post (part 1) over corresponding cross rail and slats. 3 Weave one vertical slat (part 5) through horizontal slats. Insert end into center hole of top/bottom cross rail. Instruction Text 4 Weave remaining two vertical slats (part 5) through horizontal slats opposite of center vertical slat. Insert ends into remaining holes of top/bottom cross rail.
PAGE 4
5 Separate tops of post just enough to insert remaining top/bottom cross rail (part 3) and bent trellis top (part 6 Using four 1¼” screws per post, screw together trellis. Be sure that all parts are fully inserted into posts before securing. 7 Using PVC, super or crazy glue; glue post caps onto posts.
PAGE 5
11172 1 2 3 4 5 6 7 Cambridge Trellis 2" sq. x 74" CBT Left Post 2" sq. x 74" CBT Right Post ⅞ x 3 x 27½" CB Top/Bottom ¼ x 1½ x 63" Slat ¼ x 1½ x 27½" Slat ⅞ x 1½ x 27½" CB Bent Top Hardware Bag 2" sq." Post Cap 1¼" Painted Screw Grnd Anch - Trellis (2 x 2) #8 - 1" Self Tapping White He 1.00 1.00 2.00 3.00 6.00 1.00 1.00 2.00 8.00 1.00 4.