Instructions / Assembly

ManualsBrandsDura-Trel ManualsKitchen75 in. x 22 in. White Vinyl PVC Providence Trellis

Model#

11177 (M)

Assembly Instructions

Part # Description

2" sq. x 74" Left Post

2 2" sq. x 74" Right Post

3 ⅞ x 1½ x 22" Top/Bottom Cross Rail

4 ⅞ x 1½ x 22" Center Cross Rail

5 ¼ x 1½ x 66" Vertical Slat

6 Hardware Bag

(includes:)

2" sq. Post Cap

1¼" Painted Screw

Trellis Ground Anchor Kit (includes:)

16" Steel Ground Anchor (L-Shaped)

#8 - 1" Painted Self Tapping Screw

PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.

IMPORTANT: Check boxes for Contents Listed

Check inside of parts as some parts are packaged

inside of others

In the event of missing, damaged or defective parts

please call our customer service dept. at 1-877-258-6020

When assembling components, place on a clean, flat

non-abrasive surface to avoid scratches

…

Battery or Electric Drill with #2 phillips bit

… Tape Measure

…

Hammer or Rubber Mallet (recommended)

… PVC, Super, or Crazy Glue

150 Birch Road

P.O. Box 122

Sheboygan Falls, WI 53085

www.dura-trel.com

sales@dura-trel.com

Tools Required

1-877-258-6020

General Information

Qty

Providence Trellis

Summary of content (5 pages)

PAGE 1
Providence Trellis Model# 11177 (M) Part # Assembly Instructions Description Qty 1 2" sq. x 74" Left Post 1 2 2" sq. x 74" Right Post 1 3 ⅞ x 1½ x 22" Top/Bottom Cross Rail 2 4 ⅞ x 1½ x 22" Center Cross Rail 9 5 ¼ x 1½ x 66" Vertical Slat 2 6 Hardware Bag 1 7 (includes:) 2" sq.
PAGE 2
Warranty Statement 20 Year Guarantee Please call manufacturer direct with questions concerning missing or defective parts at Toll Free: 877-258-6020. Dura-trel, Inc. products are warranted to be free from manufacturing defects resulting in delaminating, peeling, flaking, corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the PVC to change to its natural color for a period of 20 years from the date of purchase.
PAGE 3
1 Lay out one right post (part 2). Starting at bottom, insert one top/bottom cross rail (part 3) and nine center cross rails (part 4). 2 Slide left post (part 1) over corresponding cross rails. 3 Insert vertical slats (part 5) through center cross rails and into bottom cross rail.
PAGE 4
5 Separate top of post just enough to insert remaining top/bottom rail (part 3). 6 Using 1¼" screws, screw together trellis. Be sure that all parts are fully inserted into posts before securing. 7 Using PVC, super or crazy glue; glue post caps onto posts.
PAGE 5
11177 1 2 3 4 5 6 Providence Trellis 2" sq. x 74" PVT Left Post 2" sq. x 74" PVT Right Post ⅞ x 1½ x 22" PVT Top/Bottom ⅞ x 1½ x 22" PVT Center Rai ¼ x 1½ x 66" Slat Hardware Bag 2" sq." Post Cap 1¼" Painted Screw Grnd Anch - Trellis (2 x 2) #8 - 1" Self Tapping White He 1.00 1.00 2.00 9.00 2.00 1.00 2.00 6.00 1.00 4.