Replacement Part List

ManualsBrandsDura-Trel ManualsKitchen85 in. x 64 in. x 28 in. White Vinyl PVC Providence Arbor

Model#

11178 (M)

Assembly Instructions

Part # Description

max 5 x 3.5

2" sq. x 84" Left Post

2 2" sq. x 84" Right Post

3 ⅞ x 1½ x 22" Top/Bottom Cross Rail

4 ⅞ x 1½ x 22" Center Cross Rail

5 ¼ x 1½ x 59½" Vertical Slat

6 1½ x 4 x 64" Arbor Top

7 ⅞ x 1½ x 28" Arbor Top Cross Rail

8 ⅞ x 1½ x 16" Corner Brace

9 5 ⅜" Arbor Top End Cap

10 14" Ground Anchor

11 Hardware Bag

(includes:)

2" sq. Post Cap

⅞ x 1½" End Cap

1¼" Painted Screw

PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY. Super Glue Tube

IMPORTANT: Check boxes for Contents Listed

#8 - 1" Painted Self Tapping Screw

Check inside of parts as some parts are packaged

(for ground anchors)

inside of others

In the event of missing, damaged or defective parts

please call our customer service dept. at 1-877-258-6020

When assembling components, place on a clean, flat

non-abrasive surface to avoid scratches

…

Battery or Electric Drill with #2 phillips bit

… Tape Measure

…

Hammer or Rubber Mallet (recommended)

150 Birch Road

P.O. Box 122

Sheboygan Falls, WI 53085

www.dura-trel.com

sales@dura-trel.com

Tools Required

1-877-258-6020

General Information

Qty

Providence Arbor

Summary of content (5 pages)

PAGE 1
Providence Arbor Model# Part # 1 2 3 4 5 6 7 8 9 10 11 max 5 x 3.5 General Information PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY. IMPORTANT: Check boxes for Contents Listed Check inside of parts as some parts are packaged 11178 (M) Assembly Instructions Description 2" sq. x 84" Left Post 2" sq.
PAGE 2
Warranty Statement 20 Year Guarantee Please call manufacturer direct with questions concerning missing or defective parts at Toll Free: 877258-6020. Dura-trel, Inc. products are warranted to be free from manufacturing defects resulting in delaminating, peeling, flaking, corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the PVC to change to its natural color for a period of 20 years from the date of purchase.
PAGE 3
Starting at bottom of 84" left post (part 1) insert one 22" top/bottom cross rail (part 3) and eight 22" center cross rails (part 4) into holes. DO NOT insert remaining top/bottom cross rail into top hole at this time. Insert free ends of cross rails into 84" right post (part 2). Slide two 59½" vertical slats (part 5) through each center cross rail and into bottom cross rail.
PAGE 4
Instruction Text Insert two 16" corner braces (part 8) into each 64" arbor top (part 6). Slide ends of arbor top rail through holes at top of post, inserting corner braces into posts. Measure 9 inches from tips of arbor top rails and slide posts so outside of post in 9 inches from end of arbor top rails. Using three 1¼" screws per post, fasten together posts, arbor top rails and corner braces.
PAGE 5
Figure 1 Figure 2 Trellis Arbor Option 1 (soft ground) Slide one 16 inch ground anchor into bottom of each post. Slide ground anchor up to bottom cross rail. Using two 1 inch self-tapping screws per post, screw the post to the ground anchor (figure 1). When fastening, use one screw on each opposite side as shown in the drawing. Once ground anchors are attached to posts, push trellis/arbor into ground. This method can also be used for installation into hard ground if area thourougly drenched with water.