Replacement Part List

ManualsBrandsDura-Trel ManualsKitchen75 in. x 22 in. White Vinyl PVC Elmwood Trellis

Model#

11190 (M)

Part # Description

2" sq. x 74" Left Post

2 2" sq. x 74" Right Post

3 ⅞ x 1½ x 22" Top/Bottom Cross Rail

4 ¼ x 1½ x 22" Horizontal Slat

5 ¼ x 1½ x 66" Vertical Slat

6 2 x 2 x 16" Ground Anchors

7 Hardware Bag

(includes:)

2" sq." Post Cap

1¼" Painted Screw

1" Painted Self Tapping Screw

(for ground anchors)

PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.

IMPORTANT: Check boxes for Contents Listed

Check inside of parts as some parts are packaged

inside of others

In the event of missing, damaged or defective parts

please call our customer service dept. at 1-877-258-6020

When assembling components, place on a clean, flat

non-abrasive surface to avoid scratches

…

Battery or Electric Drill with #2 phillips bit

… PVC, Super, or Crazy Glue

…

Hammer or Rubber Mallet (recommended)

115 Vision Parkway

P.O. Box 122

Sheboygan Falls, WI 53085

Assembly Instructions

Elmwood Trellis

Qty

General Information

www.dura-trel.com

sales@dura-trel.com

Tools Required

1-877-258-6020

Summary of content (4 pages)

PAGE 1
Elmwood Trellis Model# Part # 1 2 3 4 5 6 7 11190 (M) Assembly Instructions Description 2" sq. x 74" Left Post 2" sq. x 74" Right Post ⅞ x 1½ x 22" Top/Bottom Cross Rail ¼ x 1½ x 22" Horizontal Slat ¼ x 1½ x 66" Vertical Slat 2 x 2 x 16" Ground Anchors (includes:) Hardware Bag Qty 1 1 2 7 2 2 1 2" sq." Post Cap 2 1¼" Painted Screw 4 1" Painted Self Tapping Screw 4 (for ground anchors) General Information PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.
PAGE 2
Warranty Statement 20 Year Guarantee Please call manufacturer direct with questions concerning missing or defective parts at Toll Free: 877-258-6020. Dura-trel, Inc. products are warranted to be free from manufacturing defects resulting in delaminating, peeling, flaking, corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the PVC to change to its natural color for a period of 20 years from the date of purchase.
PAGE 3
Lay out one 74" left post (part 1). Starting at bottom, insert one 22" top/bottom cross rail (part 3) and seven 22" horizontal slat (part 4). Insert free ends of bottom cross rail and horizontal slats into 74" right post (part 2). Weave one 66" vertical slat (part 5) through horizontal slats. Insert end into left hole of bottom cross rail. Weave remaining 66" vertical slat (part 5) through horizontal slats opposite of left vertical slat. Insert end into right hole of bottom cross rail.
PAGE 4
ight Figure 1 Figure 2 Trellis Arbor Option 1 (soft ground) Slide one 16 inch ground anchor into bottom of each post. Slide ground anchor up to bottom cross rail. Using two 1 inch self-tapping screws per post, screw the post to the ground anchor (figure 1). When fastening, use one screw on each opposite side as shown in the drawing. Once ground anchors are attached to posts, push trellis/arbor into ground.