Instructions / Assembly

3
Kingston Pergola
Instruction Text
Lay out one lower support rail(part 2).
[Lower support has six pilot
holes drilled in top edge]
Using ¾" painted screws, fasten three
upper support brackets (part 5) to lower
support.
Insert ends of lower support rail through
bottom routed holes of two posts (part 1).
Do not screw together at this time.
REPEAT steps 1 and 2 using remaining
lower support, upper support brackets and
posts.
Insert ends of two upper support rails
(part 3) through top routed holes of posts.
[Upper support have seven equally spaced pilot
holes drilled in top edge]
Do not screw together at this time.
1
2
3