32DB970 Farbfernseher Colour television Bedienungsanleitung User guide IIPP PIPP TLE BTI SU NG LA 4 EN RE SC 2 1 3 6 5 7 9 8 0 RN TU RE NU ME OK P EE SL S ETTS ESE ES PR V FA CE UR SO V+ P+ G EP ? FO IN Art Nr. 7702.
Inhaltsverzeichnis Merkmale ............................................................................ 2 Bestimmungsgemäßer Betrieb ........................................... 2 Sender verwalten: Favoriten............................................. 16 Tastenfunktionen .......................................................... 16 Sender verwalten: Kanalliste sortieren ............................. 17 Vorbereitung .......................................................................
Merkmale Einleitung • LED-Farbfernsehgerät mit Fernbedienung. • Vollintegriertes terrestrisches digitales Kabelfernsehen (DVB-T - MPEG2). • HDMI-Anschluss zur Übertragung digitaler Videound Audiosignale. Dieser Anschluss kann außerdem hochauflösende Signale verarbeiten. • USB-Eingang. • 1.000 Programme (analog + digital) • OSD-Menüsystem. • Integrierter Empfänger, mit DVB-T, MPEG-2 kompatibel. • SCART-Anschluss für externe Geräte (z. B. Videogeräte, Videospielkonsolen, Audioanlagen etc.).
Symbole in dieser Bedienungsanleitung Sicherheitshinweise Netzkabel Folgende Symbole werden in der Bedienungsanleitung als Markierung für Einschränkungen und Vorsichtsmaßnahmen sowie Sicherheitshinweise verwendet. Bitte beachten Sie solche Hinweise aus Gründen der Sicherheit. WARNUNG Wenn Sie eine so gekennzeichnete Warnung nicht beachten, können ernsthafte Verletzungen oder Tod die Folge sein. Bitte beachten Sie diese Warnungen unbedingt, um den sicheren Betrieb zu gewährleisten.
Stromquelle Das Gerät darf nur an einer Netzsteckdose mit 220-240 V Wechselspannung und einer Frequenz von 50 Hz betrieben werden. Stellen Sie sicher, dass Sie die richtige Spannung verwenden, da sonst das Gerät beschädigt werden könnte. Reinigung Ziehen Sie vor der Reinigung des Gerätes den Netzstecker aus der Steckdose. Verwenden Sie keine flüssigen oder Sprühreiniger. Benutzen Sie ein weiches und trockenes Tuch, da sonst das Gerät beschädigt werden könnte.
Lieferumfang SUBTITLE SCREEN LANG 1 2 5 6 3 4 7 8 9 0 RETURN MENU OK SOURCE FAV PRESETS SLEEP V+ P+ ? INFO EPG V- P- LED-Fernsehgerät Fernbedienung Batterien: 2 x AAA 1 X Video- & Audio-Anschlusskabel Bedienungsanleitung HINWEIS: Prüfen Sie den Lieferumfang direkt nach dem Erwerb. Stellen Sie sicher, dass alle Zubehörteile enthalten sind. Deutsch - 5 - A02_MB62_[DE]_(01-TV)_[VESTEL_GERMANY]_woypbpr_3902UK_IDTV_NICKEL17_32970LED_10075287_50199470.indd 5 20.09.
Informationen zum Umweltschutz • Dieser Fernseher ist so entwickelt, dass er zur Schonung der Umwelt weniger Strom verbraucht. Mit der Energiesparfunktion dieses Fernsehers können Sie durch die Reduzierung der Stromrechnung Geld sparen und zudem die Umwelt schonen. Gehen Sie zur Reduzierung des Stromverbrauchs wie folgt vor: • Nutzen Sie die Energiesparmodus-Option im Andere Einstellungen-Menü.
Fernbedienungstasten 1. Standby 2. Mono-Stereo / Dual I-II / Aktuelle Sprache (*) (im DTV-Modus) 3. Bildgröße 4. Grüne Taste 5. Rote Taste 6. Zifferntasten 1 7. Teletext / Mix (im TXT-Modus) 2 8. Cursor nach links 3 4 5 6 9. Menu Ein-aus 10. AV / Quelle 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
LED-TV und Bedientasten Vorder- und Rückansicht Ansicht Steuertasten Steuertasten 1. Standby- / Ein-Taste 2. TV/AV-Taste 3. Tasten Programm aufwärts/abwärts 4. Tasten Lautstärke +/Hinweis: Drücken Sie die Tasten und gleichzeitig, um das Hauptmenü anzuzeigen. HDMI 1 HDMI 2 Ansicht der Anschlüsse an der Rückseite SPDIF Coax.OUT 1. HDMI 2: HDMI-Eingang 2. HDMI 1: HDMI-Eingang HDMI-Eingänge dienen der Verbindung eines Gerätes mit HDMI-Anschluss.
5. Über den VGA-Eingang können Sie einen PC mit Ihrem Fernsehgerät verbinden. Schließen Sie das PC-Kabel an den PC-Eingang am Fernsehgerät und an den VGA-Ausgang Ihres PCs an. Bitte beachten: Durch den Einsatz eines YPbPr-zu-VGA-Kabels (nicht mitgeliefert) können Sie YPbPr-Signale per VGA eingeben. 6. Über den SPDIF-Ausgang werden die Audiosignale der aktuell angezeigten Quelle ausgegeben. Verwenden Sie zur Übertragung von Audiosignalen an ein Gerät mit SPDIF-Eingang ein SPDIF-Kabel.
USB-Eingang verwenden Seitliche AV-Anschlüsse verwenden • Über den USB-Eingang am Fernsehgerät können Sie USB-Geräte anschließen. Dieses Merkmal ermöglicht Ihnen, JPG-, MP3- und Videodateien auf einem USB-Stick anzuzeigen/wiederzugeben. • Möglicherweise sind bestimmte Arten von USB-Geräten (z. B. MP3-Player) nicht mit diesem Fernsehgerät kompatibel. • Sie sollten Ihre Dateien zur Vermeidung eines möglichen Datenverlustes sichern, bevor Sie einen Datenträger am Fernseher anschließen.
Anschluss eines DVD-Players Fernbedienung Wenn Sie einen DVD-Player an Ihr LED-TV-Gerät anschließen möchten, können Sie dafür die Anschlüsse des TV-Geräts verwenden. DVD-Player können verschiedene Anschlüsse aufweisen. Bitte sehen Sie im Handbuch Ihres DVD-Players für weiterführende Informationen nach. Schalten Sie das TV-Gerät und das Zusatzgerät aus, bevor Sie die Anschlüsse vornehmen. HINWEIS: Die in der Abbildung gezeigten Kabel sind nicht im Lieferumfang enthalten.
Eingangswahl Nachdem Sie externe Geräte an Ihr Fernsehgerät angeschlossen haben, können Sie auf unterschiedliche Eingangsquellen umschalten. Mit der „SOURCE“-Taste an der Fernbedienung können Sie der Reihe nach zwischen den Quellen umschalten. Mit den Tasten an der Fernbedienung bedienen • Über die Fernbedienung Ihres Fernsehgerätes können Sie sämtliche Funktionen Ihres Modells steuern. Die Funktionen werden in Übereinstimmung mit dem Menüsystem Ihres Fernsehgerätes beschrieben.
Digitaler Teletext (** nur für UK) Blaue Taste (Filter): Zeigt die Filteroptionen an. • Drücken Sie die “ ”-Taste. • Die Informationen des digitalen Teletexts wird eingeblendet. • Steuern Sie diese Information über die farbigen Tasten, die Cursortasten und die Taste OK. Die Bedienung kann je nach Inhalt des digitalen Teletexts unterschiedlich sein. Folgen Sie den Anweisungen, die auf dem Bildschirm des digitalen Teletexts angezeigt werden.
• Wählen Sie mit „ “ oder „ “ das gewünschte Land und heben mit „ “ die Option Teletext Sprache hervor. Wählen Sie die gewünschte Teletextsprache mit „ “ oder „ “. • Drücken Sie nach dem Einstellen der Option Teletext Sprache die „ “-Taste. Daraufhin wird die Option Verschlüsselte Kanäle suchen hervorgehoben. Sie können die Verschlüsselte Kanäle suchen-Option auf Ja einstellen, wenn Sie auch verschlüsselte Kanäle durchsuchen möchten. Wählen Sie anschließend die gewünschte Teletextsprache.
• Wenn Sie einen automatischen Suchtyp wählen und die OK-Taste drücken, wird ein Bestätigungsbildschirm eingeblendet. Wählen Sie zum Start der Installation Ja und zum Abbrechen Nein, indem Sie die Tasten „ “ / „ “ und OK drücken. • Nach der Einstellung und Bestätigung des automatischen Sendersuchtyps wird der Installationsvorgang gestartet und eine Fortschrittsleiste eingeblendet. Zum Abbrechen drücken Sie die „MENU“-Taste. In diesem Fall werden die gefundenen Kanäle nicht gespeichert.
Kanalliste bedienen Einen Kanal sperren Mit der grünen Taste können Sie alle Kanäle markieren bzw. alle Markierungen aufheben; mit der gelben Taste können Sie einen einzelnen Kanal markieren bzw. dessen Markierung aufheben. • Wählen Sie den Kanal, den Sie sperren möchten, und anschließend die Option Sperren. Drücken Sie zum Fortfahren die OK-Taste. • Sie werden aufgefordert, den PIN-Code der Kindersicherung einzugeben. Der Standard-PIN-Code lautet 0000. Geben Sie den PIN-Code ein.
Sender verwalten: Kanalliste sortieren Sie können die Sender auswählen, die in der Kanalliste aufgelistet werden. Zur Anzeige bestimmter Sendertypen können Sie die Aktive Kanalliste-Einstellung nutzen. Wählen Sie mit „ “ oder „ “ die Aktive Kanalliste-Option aus dem Kanalliste-Menü. Drücken Sie zum Fortfahren die OK-Taste. Sie können die Musik-, Bild- und Videodateien auf dem angeschlossenen USB-Speicherstick wiedergeben.
Vorlauf ( -Taste): Startet den Vorlauf. Untertitel/Audio (LANG-Taste): Stellt Untertitel/Audio ein. Gelb: Öffnet das Zeitkorrektur Untertitel-Menü. Zurück/Vor (Links-/Rechtstaste): Springt zur vorherigen oder nächsten Datei in der Diaschau. Drehen (Aufwärts-/Abwärtstaste): Dreht das Bild mit der Aufwärts-/Abwärtstaste. Endlos/Zufall (grüne Taste): Durch einmaliges Drücken deaktivieren Sie die Endlosschleife. Durch erneutes Drücken deaktivieren Sie Endlosschleife und Zufallswiedergabe.
Medienbrowser-Einstellungen Untertitel Mit dieser Funktion wird ein breites Bild (16:9-Seitenverhältnis) mit Untertiteln im Vollbildmodus angezeigt. HINWEIS: Bei Zoomauswahl von Panorama, 14:9 Zoom, Kino oder Untertitel können Sie den Bildschirm mit „ “ / „ “ nach oben oder unten verschieben. Sie können Ihre Medienbrowser-Präferenzen mit dem Einstellungen-Dialog anpassen. Markieren Sie mit „ “ oder „ “ ein Element und drücken zum Einstellen „ “ oder „ “.
Kino Hiermit vergrößern Sie ein Breitbild (16:9-Seitenverhältnis), sodass es als Vollbild angezeigt wird. Hinweis: Die Option Hintergrundbeleuchtung ist nicht sichtbar, wenn der Energiesparmodus EIN ist. Hintergrundbeleuchtung (optional): Diese Einstellung steuert die Hintergrundbeleuchtung. Sie kann auf Auto, Maximal, Minimal, Mittel und Sparmodus (optional) eingestellt werden.
Equalizer: Drücken Sie zum Aufrufen des EqualizerUntermenüs die OK-Taste. Auto-Position: Optimiert die Anzeige automatisch. Drücken Sie zum Optimieren die OK-Taste. Bildlage Horizontal: Verschiebt das Bild auf dem Bildschirm horizontal nach rechts oder links. Bildlage Vertikal: Verschiebt das Bild auf dem Bildschirm vertikal nach oben oder unten. Pixeltakt: Korrigiert Störungen, die bei Pixel-reichen Präsentationen, wie z. B.
Optionen des Einstellungen-Menüs bedienen Spracheinstellungen konfigurieren • Drücken Sie zum Markieren eines Menüelements „ oder „ “. “ • Drücken Sie zur Auswahl einer Option die OK-Taste. • Drücken Sie zum Verlassen die MENU-Taste. Optionen des Einstellungen-Menüs Über dieses Menü können Sie die Spracheinstellungen des Fernsehgerätes bedienen. Drücken Sie die MENU-Taste und wählen mit „ “ oder „ “ das Einstellungen-Symbol. Drücken Sie zur Anzeige des Einstellungen-Menüs die OK-Taste.
Spracheinstellungen Kindersicherung-Menü bedienen • Wählen Sie mit „ “ oder „ “ eine Option. • Stellen Sie die Option mit „ “ oder „ “ ein. • Drücken Sie zur Anzeige weiterer Optionen die OK-Taste. Im Konfigurationsmenü markieren Sie den Eintrag Spracheinstellungen durch Drücken der Tasten „ “ oder „ “.
Einen Timer hinzufügen • Mit der gelben Taste an der Fernbedienung fügen Sie einen Timer hinzu. Das folgende Menü erscheint auf dem Bildschirm: Kanal: Mit „ “ oder „ “ ändern Sie den Netzwerktyp. Timer-Typ: Diese Option kann nicht eingestellt werden. Datum: Geben Sie über die Zifferntasten ein Datum ein. Beginn: Geben Sie über die Zifferntasten eine Startzeit ein. Ende: Geben Sie über die Zifferntasten eine Endzeit ein. Dauer: Zeigt die Dauer zwischen Start- und Endzeit an.
Andere Einstellungen konfigurieren Wählen Sie zur Anzeige allgemeiner Konfigurationspräferenzen die Option Andere Einstellungen im Einstellungen-Menü und drücken die OK-Taste. Audio Beschreibung: Bei der Audiobeschreibung handelt es sich um eine zusätzliche beschreibende Tonspur für blinde und sehbehinderte Konsumenten visueller Medien (inkl. Fernsehen und Filme).
Teletext Tipps Das Teletext-System überträgt Informationen zu Nachrichten, Sport und Wetter an Ihr Fernsehgerät. Bitte beachten Sie, dass bei schwachem Signalempfang (z. B. aufgrund von schlechtem Wetter) Textfehler auftreten können oder der Teletext überhaupt nicht arbeitet. Die Teletext-Funktionstasten werden nachstehend aufgelistet: „ “ – Teletext / Mix : Blendet den Teletext ein. Durch erneutes Drücken erscheint der Teletext über dem Programm (Mix).
Anhang A: PC-Eingang – typische Anzeigemodi Das Anzeigegerät hat eine maximale Auflösung von 1360 x 768. Die folgende Tabelle stellt einige der üblichen Videoanzeigemodi dar. Abweichende Auflösungen werden eventuell nicht von Ihrem Fernsehgerät unterstützt. Die unterstützten Auflösungsmodi werden nachstehend aufgelistet. Wenn Ihr PC in einem nicht unterstützten Modus arbeitet, wird eine Warnmeldung auf dem Bildschirm angezeigt.
Anhang C: Unterstützte DVIAuflösungen Anhang D: Softwareaktualisierung • Ihr Fernsehgerät kann neue Softwareaktualisierungen über Rundfunkkanäle finden und installieren. Wenn Sie Zusatzgeräte über DVI-zu-HDMI-Kabel (nicht mitgeliefert) mit den Anschlüssen Ihres Fernsehgerätes • Bei der Suche über Rundfunkkanäle durchsucht der Fernseher v e r b i n d e n , k ö n n e n S i e s i c h a n d i e f o l g e n d e n die in Ihren Einstellungen gespeicherten Kanäle.
Anhang E: Im USB-Modus unterstützte Dateiformate Medium Video MPEG1, 2 .dat MPEG1, 2 .vob MPEG2 MPEG2 PCM/MP3 .avi Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2 PCM .mp3 - MPEG 1 Layer 1 / 2 (MP3) Film Musik Foto Format Dateierweiterung .mpg, .mpeg .jpg .jpeg .bmp Audio MPEG Layer 1/2/3 MPEG2 Baseline JPEG Hinweise (Max. Auflösung / Bitrate etc.) MAX 1920x1080 @ 30P 20Mbit/sek.
ABMESSUNGEN (mm) Technische Daten T x L x H (mit Standfuß): 203 x 770 x 520 TV-ÜBERTRAGUNG Gewicht (kg): 10,10 PAL/SECAM B/G D/K K’ I/I’ L/L’ T x L x H (ohne Standfuß): 40 x 770 x 480 EMPFANGSKANÄLE Gewicht (kg): 9,70 VHF (BAND I/III) AUS-/EINGANGS-ANSCHLÜSSE UHF (BAND U) 2 x HDMI HYPERBAND 1 x Scart ANZAHL KANALSPEICHER 1 x USB 1.
OSD Hinweis zur Konformität Das Fernsehgerät entspricht den folgenden Normen: In Bezug auf die Konformität mit den grundlegenden Anforderungen und den relevanten Vorschriften entspricht dieses Gerät der EMC-Richtlinie 2004/108/EC sowie der Richtlinie 2006/95/EC für Niederspannungsgeräte. Anforderungen für umweltgerechte Gestaltung energieverbrauchsrelevanter Produkte (Richtlinie 2009/125/ EC nach der Durchführungsverordnung Nr. 642/2009).
CH Wir freuen uns, dass Sie sich für den Kauf eines Produktes unseres Hauses entschieden haben, und wünschen Ihnen viel Spaß mit diesem hochwertigen Produkt. Unsere strenge Fertigungskontrolle gewährleistet die hohe Qualität unserer Geräte. Für den Fall, dass Sie dennoch eine berechtigte Beanstandung haben, gewähren wir eine Garantie für die Dauer von 2 Jahren ab Kaufdatum nach den nachfolgenden Bedingungen: 1.
9. Kein Garantieanspruch besteht: - bei unsachgemäßer Behandlung - bei mechanischer Beschädigung des Gerätes von außen - bei Transportschäden - bei Verschleiß - bei Bedienungsfehlern - bei Aufstellung des Gerätes in Feuchträumen oder im Freien - bei Schäden, die auf höhere Gewalt, Wasser, Blitzschlag, Überspannung zurückzuführen sind - bei übermäßiger Nutzung, insbesondere bei anderer als privater Nutzung - bei Missachtung der Bedienungsanleitung. - wenn das Gerät keinen technischen Defekt aufweist.
Contents Features ............................................................... 35 Introduction ........................................................... 35 Preparation ........................................................... 35 Safety Precautions ............................................... 35 Connection to a Television Distribution System (Cable TV etc.) from Tuner ............................... 36 Package Contents ................................................ 37 Environmental Information ..
Introduction Features • Remote controlled colour LED TV. • Fully integrated Terrestrial digital TV (DVB-T MPEG2) • HDMI connectors for digital video and audio. • USB input. Thank you for choosing this product. This manual will guide you through the proper operation of your TV. Before operating the TV, please read this manual thoroughly. Please keep this manual in a safe place for future reference. This device is intended to receive and display TV programmes.
• Batteries, including those which are heavy metalfree, should not be disposed of with household waste. Please dispose of used batteries in an environmentally friendly manner. Find out about the legal regulations which apply in your area. Moisture and Water Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen etc). Do not expose this device to rain or water, as this may be dangerous and do not place objects filled with liquids, such as flower vases, on top.
Package Contents LANG 1 2 5 6 3 4 7 8 9 0 Electrical devices not in the hands of children Never let children use electrical devices unsupervised. Children cannot always recognize properly any possible danger. Batteries / accumulators can be life threatening when swallowed. Store batteries out of the reach of small children. In case of swallowing a battery, medical aid has to be sought immediately. Also keep the packaging away from children as there is danger of suffocation.
Environmental Information • This television is designed to consume less energy to save the environment. You not only help to save the environment but you can also save money by reducing electricity bills thanks to the energy efficiency features of this TV. To reduce energy consumption, you should take the following steps: • You can use the Power Save Mode setting, located in the Other settings menu.
Remote Control Buttons 1. Standby 2. Mono/Stereo - Dual I-II / Currrent Language (in DVB channels) 3. Image size 4. Green button 5. Red button 6. Numeric buttons 1 7. Teletext / Mix(in TXT mode) 30 2 8. Cursor Left 3 4 5 6 9. Menu on-off 10. AV / Source selection 11. Favourite Mode Selection(in DVB channels) 12. Volume Up 13. Info / Reveal (in TXT mode) 7 14. Mute 8 15. Volume Down LANG 1 2 5 29 28 SUBTITLE 27 3 4 6 7 8 9 0 26 25 24 9 16.
TV and Operating Buttons FRONT and REAR VIEW Control Buttons VIEW Control Buttons 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons ” and Note: Press “ buttons at the same time to view main menu. HDMI 1 HDMI 2 Viewing the Connections - Back Connectors SPDIF Coax.OUT 1. HDMI 2: HDMI Input 2. HDMI 1: HDMI Input HDMI Inputs are for connecting a device that has a HDMI socket.
5. VGA Input is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. Note: You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via VGA input. WARNING: You cannot use VGA and YPbPr at the same time. 6. SPDIF Out outputs audio signals of the currently watched source. Use an SPDIF cable to trasfer audio signals to a device that has SPDIF input. Viewing the Connections - Side Connectors 1.
Using USB Media Using Side AV Connectors USB You can connect a range of optional equipment to your LED TV. • For connecting a camcorder or camera , you should use AV socket (side). To do this, you must use the supplied video/audio connection cable. First, plug single jack of the cable to the TV’s AV IN socket (side). Afterwards, insert your camera cable’s (not supplied) connectors into the plural part of the video/ audio connection cable. Colours of the connected jacks should match.
Connecting to a DVD Player Switching On/Off If you want to connect a DVD player to your TV, you can use the connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Cables shown in the illustration are not supplied. • If your DVD player has an HDMI socket, you can connect via HDMI.
You can operate your TV using both the remote control and onset buttons. • Please note that event information is updated automatically. If there is no event information data available for channels, the EPG will be displayed with blanks. Operation with the Buttons on the TV EPG Timeline Schedule Basic Operations Volume Setting • Press “ ” button to decrease volume or “ ” button to increase volume, so a volume level scale (slider) will be displayed on the screen.
Green button (Next Time Slice): Displays the programmes of the next time slice. • When you press the “ ” button again, the digital teletext screen will be displayed. Yellow button (Prev Day): Displays the programmes of previous day. Analogue Teletext Blue button (Next day): Displays the programmes of the next day. “ ” button (Filter): Views filtering options. Numeric buttons (Jump): Jumps to the preferred channel directly via numeric buttons.
• Press OK button on the remote control to continue and the following message will be displayed on the screen: To select the “Yes” or “No” option, highlight the item by using “ ” or “ ” buttons and press OK button. Afterwards the following OSD will be displayed on the screen and the TV will search for both digital and analogue TV broadcasts. • Press OK button to quit channel list and watch TV. Installation Press “MENU” button on the remote control and select Installation by using “ ” or “ ” button.
Analogue Fine Tune Manual Tuning HINT: This feature can be used for direct broadcast entry. • Select Manual Channel Scan from the Installation menu by using “ ”/“ ” and OK buttons. Manual Scan options screen will be displayed. • Select Analogue Fine Tune from the Installation menu by using “ ” or “ ” and OK buttons. The analogue fine tune screen will be displayed. The Analogue Fine Tune feature will not be available if there are no analogue channels, digital channels and external sources stored.
Operating the Channel List Locking a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag a single channel. • Select the channel that you want to lock and select Lock option. Press OK button to continue. • You will be asked to enter parental control PIN. Default PIN is set as 0000. Enter the PIN number. • Press “ ” or “ ” button to select the channel that will be processed. Press “ ” or “ ” button to select a function on Channel List menu.
Media Playback Using Media Browser Managing Stations: Sorting the Channel List You can select broadcasts to be listed in the channel list. To display specific types of broadcast, you should use the Active channel list setting. If the USB stick is not recognized after power off/on or First Time Installation, unplug the USB device, turn the TV off and on again and re-insert the USB device. Select Active channel list from the Channel list menu by using “ ” or “ ” button. Press OK button to continue.
Lang (Play Preview): Displays selected file in a small preview screen. FAV: Sorts files by date. INFO: Changes filter options. Slideshow Options TEXT button: Views images in thumbnails. FAV: Sorts files by name. Zoom (RED button) : Zooms picture. Note: If a picture is zoomed out/displayed in full screen, you cannot navigate the picture by using Up/ Down/Left/Right buttons. Play (RED button): Starts the video playback. Stop (BLUE button): Stops the video playback.
FAV: Sorts files by Title,Artist or Album. Note: If the Viewing Style is set to Folder in Media Browser Settings, Music folder will be displayed as sorted and there is no need to sort files again by pressing FAV button. INFO: Changes filter options. Note: Auto mode only will be available in HDMI, YPbPr and DTV sources. 16:9 This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. Loop/Shuffle (Blue button): Press once to disable Loop.
4:3 Use to view a normal picture (4:3 aspect ratio) as this is its original size. Configuring Picture Settings You can use different picture settings in detail. Press “MENU” button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu. Panoramic This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. The top and bottom of the picture are slightly cut off.
Noise Reduction: If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount. Noise Reduction can be set to one of these options: Low, Medium, High or Off. Autoposition: Automatically optimizes the display. Press OK to optimize. Advanced Settings V Position: This item shifts the image vertically towards the top or bottom of the screen. • Colour Temp: Sets the desired colour tone. Setting Cool option gives white colours a slight blue stress.
Operating Settings Menu Items • Press “ ” or “ ” button to highlight a menu item. • Press OK button to select an item. • Press “MENU” button to exit. Settings Menu Items Conditional Access: Controls conditional access modules when available. Language: Configures language settings. Parental: Configures parental settings. Timers: Sets timers for selected programmes. In the equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User.
Language Settings Configuring Language Preferences You can operate the TV’s language settings using this menu. Press “MENU” button and select the Settings icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Language and press OK to continue: In the configuration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use “ ” or “ ” button to set an item.
After coding the correct PIN number, parental settings menu will be displayed: Press “ ” button to set timers on an event. Programme timer function buttons will be displayed on the screen. Adding a Timer • Press YELLOW button on the remote control to add a timer. The following menu appears on the screen: Channel: Changes network type by using “ ” or “ ”. Timer Type: This feature is unavailable to be set. Date: Enter a date using the numeric buttons.
Date,Time,Time Settings Mode and Time Zone Setting will be available. Use “ ” or “ ” buttons to highlight the Time Settings Mode. Time Settings Mode is set using “ ” or “ ” buttons. It can be set to AUTO or MANUAL. Configuring Other Settings To view general configuration preferences, select Other Settings in the Settings menu and press OK button. When AUTO is selected, Date/Time and Time Zone options will not be available to be set.
Audio Description: Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. The description narrator talks through the presentation, describing what is happening on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary). You can use this feature, only if the broadcaster supports that additional narration track.
Tips Screen Care: Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety, unplug the mains plug when cleaning the set. When moving the TV, hold it properly from the bottom of the unit. Image Persistence: Please note that ghosting may occur while displaying a persistent image. On LED TVs’ image persistence may disappear after a short time. Try turning the TV off for a while.
Appendix A: PC Input Typical Display Modes Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix D: Software Upgrade Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI to HDMI cables (not supplied), you can refer to the following resolution information.
Appendix E : Supported File Formats for USB Mode Media Video MPEG1, 2 .dat MPEG1, 2 .vob MPEG2 Movie Music Photo Format File Extension .mpg, .mpeg MPEG2 MPEG2 PCM/MP3 .avi Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2 PCM .mp3 - MPEG 1 Layer 1 / 2 (MP3) .jpg .jpeg Baseline JPEG Remarks (Maximum resolution/Bit rate etc.
Specifications TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz. AUDIO German + Nicam Stereo AUDIO OUTPUT POWER (WRMS.
50199470