Operation Manual

English - 46 -

6. SPDIF Coaxial Out outputs digital audio signals of the currently watched source.

Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input

7. RF Input connects to an aerial antenna system.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device

to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

8. PC Input is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC

9. HDMI Inputs are for connecting a device that has an HDMI



Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets

can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI

connection.

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that

you subscribe to. For more information, see “Conditional Access” section.

2. USB Inputs.

Note that programme recording feature is available via these USB inputs. You can connect

external hard disk drives to this input.

3. Side HDMI Input (HDMI 4) is for connecting a device that has an HDMI socket.

4. Headphone jack is used for connecting an external headphone to the system. Connect

to the HEADPHONE jack to listen to the TV from headphones (optional).

5. Side audio-video connection input is used for connecting video and audio signals of

external devices. To make a video connection, you must use the supplied AV connection





input (located on the plural side) of the supplied AV connection cable. Colours of the

connected jacks should match.

To enable audio connection, you must use RED and WHITE inputs of the side AV



and WHITE jack of the supplied side AV connection cable. Colours of the connected

jacks should match.

Note: You should use audio inputs of side AV connection cable (RED & WHITE)

to enable sound connection when connecting a device to your TV by using PC or

COMPONENT VIDEO input.

6. Volume/ Programme/ Source and Standby-On switch.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the

mains. Plug the power cable to the mains socket outlet.

Aerial & Cable Connection

Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

Aerial or Cable

5Vdc Max:500mA

SIDE AV

HDMI

MODE