Safety data sheet

Date : 03/08/2015 Page 4/9
Revision : N°4 (01/04/2015)
SAFETY DATA SHEET (REGULATION (EC) n° 1907/2006 - REACH)
Version : N°3 (03/08/2015)
The floor must be impermeable and form a collecting basin so that, in the event of an accidental spillage, the liquid cannot spread beyond this
area.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C.
Storage in a dry, frost-free and well ventilated place.
Packaging
Always keep in packaging made of an identical material to the original.
7.3. Specific end use(s)
No data available.
SECTION 8 : EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control parameters
Occupational exposure limits :
- UK / WEL (Workplace exposure limits, EH40/2005, 2007) :
CAS TWA : STEL : Ceiling : Definition : Criteria :
106-97-8 600 ppm 750 ppm - - -
- Ireland (Code of practice for the safety, Health and Welfare at Work, 2010) :
CAS TWA : STEL : Ceiling : Definition : Criteria :
106-97-8 600 ppm 750 ppm - - -
8.2. Exposure controls
Personal protection measures, such as personal protective equipment
Pictogram(s) indicating the obligation of wearing personal protective equipment (PPE) :
Use personal protective equipment that is clean and has been properly maintained.
Store personal protective equipment in a clean place, away from the work area.
Never eat, drink or smoke during use. Remove and wash contaminated clothing before re-using. Ensure that there is adequate ventilation,
especially in confined areas.
- Eye / face protection
Avoid contact with eyes.
Use eye protectors designed to protect against liquid splashes
Before handling, wear safety goggles in accordance with standard EN166.
Do not spray in the direction of the eyes.
- Hand protection
Wear suitable protective gloves in the event of prolonged or repeated skin contact.
Type of gloves recommended :
- Nitrile rubber (butadiene-acrylonitrile copolymer rubber (NBR))
- PVA (Polyvinyl alcohol)
Not necessary at efficient use. Wash your hands after contact with skin.
- Body protection
Work clothing worn by personnel shall be laundered regularly.
After contact with the product, all parts of the body that have been soiled must be washed.
Not necessary at efficient use. Product in contact with skin may cause frostbite. Wash skin that has been in contact with the product, with
water and soap.
- Respiratory protection
Anti-gas and vapour filter(s) (Combined filters) in accordance with standard EN14387 :
- A1 (Brown)
Do not breathe spray. Use only in well-ventilated areas.
Exposure controls linked to environmental protection
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental
protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce
emissions to acceptable levels.
- Made under licence of European Label System® MSDS software from InfoDyne - http://www.infodyne.fr -
5796 POWERCLEAN STANDARD