Safety data sheet

Date : 03/08/2015 Page 5/9
Revision : N°4 (01/04/2015)
SAFETY DATA SHEET (REGULATION (EC) n° 1907/2006 - REACH)
Version : N°3 (03/08/2015)
SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
General information :
Physical state : Fluid liquid.
Spray.
Color : Colourless, clear
Odour : Specific
Important health, safety and environmental information
pH : Not relevant.
Vapour pressure (50°C) : Not relevant.
Density : 0.545
Water solubility : Insoluble.
Chemical combustion heat : >= 30 kJ/g.
Flash point : < 0 °C
Flammability : Extremely flammable
9.2. Other information
VOC (g/l) : 545.00
Pressure at 20°C : ± 5.0 bar
Pressure at 50°C : < 10 bar
Water content : < 0.3 % w/w
SECTION 10 : STABILITY AND REACTIVITY
10.1. Reactivity
No data available.
10.2. Chemical stability
This mixture is stable under the recommended handling and storage conditions in section 7.
10.3. Possibility of hazardous reactions
When exposed to high temperatures, the mixture can release hazardous decomposition products, such as carbon monoxide and dioxide, fumes
and nitrogen oxide.
Under normal conditions of storage and use, hazardous reactions will not occur.
10.4. Conditions to avoid
Any apparatus likely to produce a flame or to have a metallic surface at high temperature (burners, electric arcs, furnaces etc.) must not be
allowed on the premises.
Avoid :
- heat
- flames and hot surfaces
- frost
Protect from sunlight and do not expose to temperatures exceeding 50°C. Keep away from heat and sources of ignition. Storage in a dry,
frost-free and well ventilated place.
10.5. Incompatible materials
Keep away from :
- oxidising agents
10.6. Hazardous decomposition products
The thermal decomposition may release/form :
- carbon monoxide (CO)
- carbon dioxide (CO2)
The product is stable. Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11 : TOXICOLOGICAL INFORMATION
11.1. Information on toxicological effects
Splashes in the eyes may cause irritation and reversible damage
- Made under licence of European Label System® MSDS software from InfoDyne - http://www.infodyne.fr -
5796 POWERCLEAN STANDARD