Config Guide

Appendix
EN-48
MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2.”
 AVERTISSEMENT - RISQUE D'EXPLOSION – LA SUBSTITUTIOND E
COMPOSANTSP EUTR ENDRE CE MATERIEL INACCEPTABLE POUR LES
EMPLACEMENTS DE CLASSE I, DIVISION 2.
 “WARNING: TO PREVENT IGNITION OF A HAZARDOUS ATMOSPHERE,
BATTERIES MUST ONLY BE CHARGED IN AN AREA KNOWN TO BE NON-
HAZARDOUS.”
 “AVERTISSEMENT- RISQUED 'EXPLOSION- AFIN D'EVITER TOUT RISQUE
D'EXPLOSION, S'ASSURER QUE L'EMPLACEMENT EST DESIGNE NON
DANGEREUX AVANT DE CHANGER LA BATTER IE.”
 “WARNING - EXPLOSION HAZARD - DO NOT CONNECT OR DISCONNECT
WHILE CIRCUIT IS LIVE UNLESS AREA IS KNOWN TO BE NON-
HAZARDOUS.”
 “AVERTISSEMENT - RISQUE D'EXPLOSION. NE PAS BRANCHER OU
DÉBRANCHER TANT QUE LE CIRCUIT EST SOUS TENSION, À MOINS
QU'IL NE S'AGISSE D'UN EMPLACEMENT NON DANGEREUX.”
Safety Instructions
These safety instructions should always be observed to ensure safe operation
when handling the device.
 Do not place this device on an unstable table or surface. The device may fall,
causing serious damage to its housing and components.
 Do not cover the device, or block the air ventilation holes of the device with
any other objects.
 Do not use any sharp object to tap on the display screen.
 Do not expose the device to direct sunlight and dusty environments.
 Keep the device away from excessive heat and humidity.
 Keep liquids away from the device.
 Keep the device away from any magnetic emitting devices as this may affect
the quality of the wireless signal reception.
 When using an AC adapter:
 Place this device in a location that is close enough to an electrical
outlet to accommodate the length of the power cord.
 Operate this device only with the type of power source indicated on the
device marking label.