Datasheet

B
A
C
myGrid
™
Overview
Caution: Contains small parts – Keep out of reach of children.
1
Operation - continued
3
A. Device charging surface
B. DC power plug
C. Indicator light
Operation
2
Set Up
1. Place the myGrid™ charging pad in your favorite flat location.
2. Plug the AC adapter into the wall outlet.
3. Insert the DC power plug firmly into the myGrid™ charging pad.
Maintenance and Usage
4
Charging your myGrid™-enabled devices
•
Once the myGrid™ charging pad is powered on, the indicator
light will turn on while the system status is checked. If the system
is functioning properly and there is no fault detected (i.e. keys,
metal object or a hand placed on the charge pad), then the
indicator light will turn off in 3-5 seconds.
You are now ready to charge your myGrid™-enabled devices.
Simply place them on the myGrid™ charging pad with the
contacts facing down. The indicator light will light up to show
you that your device is receiving power. If a fault is detected, the
indicator light will (1) not appear upon initial power up or (2)
turn off during operation.
•
When not in use, the myGrid™ charging pad will be in Sleep
Mode. In this mode, the charging surface and the indicator light
both turn off.
•
You can simultaneously charge up to four myGrid™-enabled
devices (BlackBerry’s, Motorola Phones, Apple iPhone, etc.) on the
myGrid™ charging pad. Make sure that the devices are sitting flat
on and making firm contact with the charging pad.
•
Make sure to place only myGrid™-enabled devices on the pad.
Devices that are not compliant will not receive power.
•
Non-compliant devices will not be damaged but will also not
receive power from the charging pad.
•
The AC wall outlet shall be located near the myGrid™ charging
pad and shall be easily accessible.
•
The myGrid™ charging pad can charge up to four myGrid™-
enabled devices (cell phones, music players, cameras, etc.).
However, certain devices or combination of devices may require
more power than is available. When this happens, the indicator
light will blink. Remove some devices to remedy this problem.
•
Ensure that dirt or other contaminants are not on the myGrid™
charging pad. Charging will not occur if proper contact between
the myGrid™-enabled device and charging pad is not made.
•
Ensure that the device is resting flatly on the myGrid™ charging
pad. Charging will not occur if the device being charged is in a
tipped position and proper contact is not made.
Troubleshooting Guide
6
The following table lists potential problems and their suggested solutions:
Problem Cause Solution
Cleaning the myGrid
™
Charging Pad
5
•
Disconnect power from the myGrid™ charging pad.
•
Wipe surface with a damp cloth.
•
Remove any excess moisture with a clean, dry cloth.
•
Reconnect power to the myGrid™ charging pad.
Technical Specifications
7
Max Number of Devices: 5 (15W max)
Dimensions: 6.75 in. W x 8.5 in. L x 0.75 in. H
Power input: 100 – 240 VAC, 0.4 Amps, 50 – 60 Hz
Power output: 15VDC; 1A
Weight: 4.0 oz.
Certifications: FCC, ETL
For additional charging options, look for:
8
Duracell Power Sleeves™ for:
•
BlackBerry Curve
•
BlackBerry Pearl
•
iPod touch
•
iPhone
Duracell Power Clip™
myGrid
Operation
Manual
Device does not indicate
(cell phone display)
charging when placed on
myGrid™ charging pad.
The device is not myGrid™-
enabled. The charging pad
will only power devices that
are myGrid™ compatible.
Place only myGrid™-enabled
devices on the charging pad.
Device is not resting properly
on myGrid™ charging pad
surface.
Ensure that device is resting
flatly on and is making good
contact with the myGrid™
charging pad surface. Also,
clean pad surface if needed.
DC power plug not firmly
plugged into charging pad or
AC adapter not plugged into
wall socket.
Ensure AC adapter is plugged
into a working outlet and DC
power plug is firmly inserted
into charging pad.
Metallic objects such as keys
or coins may be on the
charging pad.
Remove metal objects
and charging will resume
normally.
Device is not resting properly
on myGrid™ charging pad
surface.
Ensure that device is resting
flatly on (contact balls down)
and is making good contact
with the myGrid™ charging
pad surface. Also, clean pad
surface if needed.
Indicator light continuously
blinks on and off (devices
do not charge).
Overload condition; too many
devices are resting on the
charging pad at one time.
Remove devices, one at a
time, until blinking stops.
Keep in mind that, in most
instances, the myGrid™
charging pad can
simultaneously charge
up to four devices.
Indicator light does not
turn on when a device is
placed on myGrid™
charging pad.
WCPM0001298942000
QUALITY GUARANTEE DURACELL offers a limited 1-year guarantee against
defects due to faulty materials or workmanship and guarantees the performance
of each DURACELL myGrid™ device for 1 year from date of purchase. If found to
be defective, this DURACELL myGrid™ device will be replaced without charge
when returned to DURACELL. This guarantee does not apply to damage from
misuse or abuse beyond normal usage. This guarantee gives you specific legal
rights, and you may also have other rights which vary from state to state. Send
myGrid™ device to: DURACELL, Berkshire Corporate Park, Bethel, CT U.S.A. 06801
Attention: Consumer Relations Department. If you would like additional
information on myGrid™ devices call 1-800-551-2355.
TM
4.500
10.50
Technical Drawing# 98981744.001
4.500
10.50
3.500
(TYP)
3.250
COPY LIMITS
(TYP)
0.125
(TYP)
0.125
(TYP)
4.250
COPY LIMITS
(TYP)
093827
GILLETTE
DURACELL
P&G (Duracell) 56707
Kristine Erwin
P-058169-012 DURACELL RECHARGABLE CHARGER
W2 Duracell - US - POWER PERIPHERAL MY GRID STARTER CHARGE PAD KIT INSTRUCTION SHEET
P-058169
012
98942000
Offset
98981744.001
Saved: August 18-2009 - 11:47 (-04 GMT)
User: Andrew Armstrong
File: /Volumes/Production_Files/09/093/0938/093827_DURACELL/ProductionArt/98942000_093827_012.ai
Document: 98942000_093827_012.ai
Printed:
Die
093827
PG 1616
Black
093827