Install Manual

5.5 Wiring the battery modules

Follow the battery module power and communication jumper

wiring below.

5.5.1 Battery module DC -/+ jumper cable wiring

Install the cables in the following sequence as shown.

1. Terminate the two DC- module jumper cables referenced

A1.

2. Terminate the DC- module jumper cable referenced A2.

3. Terminate the two DC+ module jumper cables referenced

B1.

4. Terminate the DC+ module jumper cable referenced B2.

5.5.2 BMS communication jumper cable wiring

Install the cables in the following sequence.

IMPORTANT! All module interconnecting BMS jumpers

terminate at the [Linkport] terminals. Note the Linkport

reference, 0 an 1, for each port connection.

1. Terminate the BMS jumper cable C2 between batteries #2 - 3.

2. Terminate the BMS jumper cables C1 between batteries #1-2

and #3-4.

Ref

P/N

Description

Pylon p/n label

A1 #3790

module jumper

BLK 180 mm

WI0BSC1000B2

A2 #3793

module jumper

BLK 400 mm

WI0CUS300004

B1 #3789

DC+ module jumper

RED 180 mm

WI0BSC100001

B2 #3796

DC+ breaker cable

RED 400 mm

WI0CUS300001

C1 #3792

BMS jumper short 210

WI0SRJ458025

C2 #3794

BMS jumper long 700

WI0SUS300002