Install Manual

1 Safety

This manual contains important instructions for the DURACELL POWER CENTER 5 kW. The components described by this

manual are intended to be used as part of an energy storage system and installed per all local building codes and

regulations in addition to the National Electrical Code, ANSI/NFPA 70 (for US) and Canadian Electrical Code (for Canada).

Throughout this manual, the following symbols will be used to highlight important information and procedures:

ymbol

Definition

Symbol

Definition

WARNING! A dangerous voltage or

other condition exists. Use extreme

caution when performing these tasks.

Meter measurement required.

CAUTION! This information is critical to

the safe installation and or operation of

the inverter. Follow these instructions

closely.

Torque rating critical to operation.

NOTE: This statement is important.

Follow instructions closely.

operating status

1.1 In case of emergency

In all cases:

• If safe to do so, switch off the AC breakers (external to the system).

• Contact the fire department or other required emergency response team.

• Evacuate the area, and if applicable, follow your emergency evacuation plan if others are in proximity to the

installed location.

In case of fire:

• When safe, use a fire extinguisher suitable for use; including A, B, and C dry chemical fire extinguishers or carbon

dioxide extinguishers.

In case of flooding:

• Stay out of water if any part of the system or wiring is submerged.

• Do not attempt to operate batteries that have been submerged in water even after they have been dried.

In case of unusual noise, smell or smoke:

• If safe to do so, ventilate the area.

1.2 Battery module safety precautions

This product is integrated with Pyltontech US3000C series battery modules. Refer to the Pylontech product manual for

complete safety instructions regarding handling of battery modules.

EMS