User Manual

8 Configuration

8.1 Downloading the Installer App

Phone / Tablet: Use the QR code to download the app >>>

Web-browser:

https://pv.duracellpowercenter.app

8.2 Wi-Fi setup

1. Open the Installer App, and login using account credentials.

Note: First time users must request an account from the

reseller.

2. Click on the [Network Configuration] icon.

3. Select [Wi-Fi] and enter the customer supplied network and

password credentials.

4. Click [SEND TO DTU] to complete.

8.3 Creating the site map in the Installer App

1. Open the Installer App, and login using account credentials.

2. Select the [Station] tab at the bottom of the page, then select [+] at the top-right.

3. Select [Quick] for a single unit installation, or [Professional] for a mult-unit installation.

4. Fill in all fields applicable to the unit(s) being installed. Select [Next] when completed.

5. Select [Add DTU ID] then [scan], (or manually input the DTU ID). Select [Next] when completed.

6. Select [Start binding], then choose the angle/tilt for the PV array.

7. Select [scan microinverter ID], (or manually input the microinverter IDs as indicated on the

Installation Map sheet, and click the check box after completing each ID). Select [Next] when

completed.

8. Select [Finish] when all microinverter IDs have been added.

9. [Disable] the scan function (top-right) and design the Layout base on the installation. Select the

check box (top-right), and then select [Next] after completing the design.

10. Upload a picture of the site and select “Finish” to complete the site creation. The new site will

appear on the station list within the Installer account.

11. Select the [Networking] command button after ther power station has been created.

Note: It may take up to 30 minutes for the power station to appear online with all microinverter IDs

detected.