Specifications

Safety
iv 975-0339-01-01
-
WARNING: Heated surface
Ensure at least 2" (5 cm) air space is maintained on all sides of the
Duracell® Powerpack. During operation, keep away from materials
that may be affected by high temperatures such as blankets, pillows
and sleeping bags.
WARNING: Fire hazard
Never allow jump-start cables’ red and black clamps to touch each
other or another common metal conductor. This could cause damage
to the unit and/or create a sparking/explosion hazard. Always
disconnect the jump-start cables from the unit after use and clip the
plastic guard over the jump-start cable port.
WARNING: Fire hazard
Jump-start cable clamps must be connected positive to positive (red
clamp to battery “+”) and negative to negative (black clamp to
battery “–”). A reverse polarity connection (positive to negative) may
cause damage to the unit and/or create a sparking/explosion hazard.
WARNING: Fire hazard
The jump-start feature is designed for short term operation only—
less than 4 seconds. Operating the jump-start feature for more than 4
seconds may cause damage to the unit. Allow the Duracell®
Powerpack to cool down for at least 3 minutes after each jump-start.
WARNING: Risk of explosion, fire or burns
The battery terminals exposed at the jump-start cable port have
enough energy present to cause a spark, creating an explosion hazard,
or to cause burns if a metal object contacts both terminals. Always
clip the plastic guard over the port when not in use.
CAUTION
Do not connect any AC appliance with the neutral conductor
connected to ground to the Duracell® Powerpack.
CAUTION
Do not expose the Duracell® Powerpack to temperatures over
40 °C (104 °F).
Duracell_600HD.book Page iv Wednesday, June 13, 2007 4:14 PM