Operating instructions

15
Red POSITIVE
(“+”) clamp
connects to
positive battery
terminal
Black NEGATIVE
(“
- ”) clamp connects
to
metal part of car
(block, cylinder, etc)
WARNING: Fire hazard
Do not crank the engine for more than 4 seconds. The
jump-start feature is designed for short term operation
only. Operating the jump-start feature for more than
4 seconds may cause damage to the unit. Allow the
Duracell
®
Powerpack Pro to cool down for at least 3
minutes after each jump-start.
10. Switch OFF the jump-starting power switch.
11. Remove the red positive (+) clamp and then the black
negative (–) clamp from the vehicle.
12. Store the jump-start clamps in the appropriate holder
on each side of the Duracell
®
Powerpack Pro.
Important: Recharge the Duracell
®
Powerpack Pro as
soon as possible after each use. See “Recharging the
Duracell Powerpack Pro Battery” on page 20.