Operating instructions

► Recharging the Duracell

Powerpack Pro battery

To check the battery’s charge level, press the Battery Level button

Note: Battery fuel gauge status is only accurate when the

Duracell

Powerpack Pro has been disconnected from all

appliances and all charging sources for 15 minutes. You

can recharge the battery using:

• The fully automatic “plug-in-and-forget” AC cord;

• The DC charging cable to recharge from your vehicle

as you drive;

• A generator equipped with a regulated 12V battery

charging outlet;

• A solar panel.

Recharging with the AC cord

Recharging with the AC cord is a true “plug-in-and-forget” charging

method.

CAUTION

Do not operate DC appliances while the Duracell

Powerpack Pro is being recharged with the AC cord. The

AC cord may be permanently damaged if AC appliances

or 12V DC appliances are operated while the AC cord is

connected.

To recharge with the AC cord:

1. Disconnect any 12V DC appliance and turn the light

switch to OFF.

2. Insert the AC cord end into the AC cord input socket

located below the front panel (see Page 3).

3. Plug the AC cord into a standard AC wall outlet.

4. While the Duracell

Powerpack Pro is recharging, the

Battery Status LED is red. If the Duracell

Powerpack