Specifications

24
CAUTION
Do not operate AC or DC appliances while the Duracell
®
Powerpack is being recharged with the DC charging cable
from your vehicle.
To recharge the Duracell
®
Powerpack while you drive
using the DC charging cable:
1. While the vehicle engine is running, plug one end of
the DC charging cable into the DC power socket of the
Duracell
®
Powerpack.
2. Plug the opposite end of the DC charging cable into the
vehicle’s lighter socket or 12 V accessory outlet.
3. Once the Duracell
®
Powerpack is fully charged or if
your vehicle’s engine is not running, disconnect the DC
charging cable from both sockets. Most of the capacity
will be restored in four hours while the vehicle engine is
running.
Note: The Charging Status light will not illuminate when the
Duracell
®
Powerpack is recharged through the DC charging
cable.
Note: Battery Fuel Gauge indicator is only accurate when
the Duracell
®
Powerpack has been disconnected from all
appliances and all charging sources for 15 minutes.
Important: Do not leave the Duracell
®
Powerpack
permanently connected to the vehicle’s lighter socket or
12 V accessory outlet.