Operating instructions

charging is complete (about 24 hours if the battery is

completely discharged).

Important: The 24-hour charging time for the Duracell

Powerpack assumes that there is 120 V AC at the AC

wall outlet. If the voltage is less than 120 V AC, it may

take more than 24 hours to fully recharge the Duracell

Powerpack. If, after 24 hours of charging, the Battery

Status LED remains red, continue to charge the unit for

another 12 hours. The unit will be ready for use even if the

Battery Status LED remains red.

Important: If you keep the Duracell

Powerpack in

storage, the battery will discharge over time. Remember

to recharge the battery every three months to keep the

Duracell

Powerpack operational.

Note: Once fully charged, the charging current

automatically reduces to a maintenance charge mode,

and the Duracell

Powerpack may be left permanently

connected to the AC Charger.

Using the Built-in Light

The Duracell

Powerpack has a built-in light to illuminate a

room in an emergency.

Using the USB Port

The USB Port provides up to 2.1 Amps to charge USB

enabled devices such as cell phones, smartphones,

iPhones and iPads.

To charge USB devices:

Connect your USB device (smartphone, MP3 player, etc.)

to the USB port using the USB cable supplied with your

device. Charging will start and up to 2.1 Amps of current

can be supplied by the port. The USB device controls the

amount of current supplied. The Powerpack never “pushes”

more than required by the devices.