Operating instructions

25
above 15 V DC. This may lead to accumulations of
hydrogen, causing exposure to fi re and explosion hazard.
CAUTION
Do not operate AC or DC appliances while the Duracell
®
Powerpack is being recharged with the DC charging cable
from your vehicle.
To recharge the Duracell
®
Powerpack while you drive using
the DC charging cable:
1. While the vehicle engine is running, plug one end of the
DC charging cable into a DC power outlet on the Duracell
®
Powerpack.
2. Plug the opposite end of the DC charging cable into the
vehicle’s lighter socket or 12 V accessory outlet.
3. Once the Duracell
®
Powerpack is fully charged or if your
vehicle’s engine is not running, disconnect the DC charging
cable from both sockets.Most of the Duracell
®
Powerpack’s
capacity will be restored in 2 ½ hours while the vehicle engine
is running.
Note: The Battery Level LEDs are only accurate when
the Duracell
®
Powerpack has been disconnected from all
appliances and all charging sources for 15 minutes.
Important: Do not leave the Duracell
®
Powerpack
permanently connected to the vehicle’s lighter socket or
12 V accessory outlet. Do not solder or hard wire the DC
charging cable from the Powerpack to an external electrical
system.The charging cable is designed for temporary use